PUSH SWITCH LIT LATCH GREEN 1P1T ON/OFF 3A/125V 16MM TH SOL/PUSH
Part No: 1443
Manufacturer:
Stock No: SCJA-3184
SKU No: 248396
![PUSH SWITCH LIT LATCH GREEN 1P1T ON/OFF 3A/125V 16MM TH SOL/PUSH Stock Number: SCJA-3184 $3.95](https://secure.sayal.com/images_tnx/TNX_SCJA-3184.JPG)
Image is for illustrative purposes only. Please refer to product description.
Stock may not be available at all store locations. Inventory quantites can change without notice.
| Burlington | 5 |
| Cambridge | 4 |
| Markham | 5 |
| Mississauga | 6 |
| Scarborough | 2 |
| Vaughan | 4 |
|
Warehouse |
8 |
A switch is a switch, and an LED is an LED, but this LED illuminated button is a lovely combination of both! It's a medium sized button, large enough to press easily but not too big that it gets in the way of your project panel. It has a built in LED that can be controlled separately from the switch action - either to indicate or just to look good.
The body is a black plastic with the LED built inside. There are two contacts for the button and two contacts for the LED, one marked + and one -. The forward voltage of the LED is about 2.2V so connect a 220 to 1000 ohm resistor in series just as you would with any other LED to your 3V or higher power supply.
This particular button has a green body and LED and is latching on/off. The two switch contacts are either connected or disconnected. When you push the button they will switch from one to the other, like an on-off switch. The LED is separated from the button, so you can make it light up when on, light up when off, always lit, etc.
Max Dimensions: 18.06mm / 0.7" x 18mm / 0.7" x 29.4mm / 1.15"
Shaft Dimensions: 14.89mm / 0.58" x 15.56mm / 0.6" x 18.7mm / 0.73"
Button Height: 5mm / 0.2"
Button Height Depressed: 3.5mm / 0.15"
Weight: 4.6g