RECORDING MODULE 20SEC CARD TYPE CAN BE PASTED IN GREETING CARDS
Part No: CT94R
Stock No: 2041-GA6
SKU No: 231617
Image is for illustrative purposes only. Please refer to product description.
Stock may not be available at all store locations. Inventory quantites can change without notice.
20 second card type recording unit. This module can be pasted (self-adhesive backing) into birthday cards, Christmas cards etc. When the card is opened your message will be played. You can record your own custom 20 second message with the built in microphone. The module is pre wired with a speaker and battery. All that is left for you to do is to record a message, past the module in your card and remove the little plastic tubing from the metal strip that protects the battery from running down when shipped from the factory.
How to attach and record your message.
1) Peel the wax paper off the back of the recorder unit.
2) Place the recorder on the fold of the card as shown in the image below.
3) Remove plastic tube from the contact.
4) Press and hold the record button and record your message.
5) Release the button once you are finished.
6) Close your card.
7) If you have done the steps above correctly, the message should playback when the card is opened.
8) You can record you message again by repeating steps 4-7 until you are happy with the message.
9) To make the recording permanent, cut the wires for the microphone and the button as close to the the circuit board as possible.
Size: Length : 105mm, Width : 65mm, Height: 6.4mm (4.1"x 2.6" x 0.25")
Accessories: Battery Insulator, Battery G10 3pcs, Speaker 40mm (1.6")
Function: Record & Play back
Operation: Record : Press switch. Play back : Open the card.
Length of record: 20 seconds
RoHS compliant: YES
Limited Stock Available To purchase, Please contact our Sales Department
(+1-416-494-8999) or email email@example.com