# | Store | Qty | Aisle |
---|---|---|---|
Burlington | 14 | ||
Cambridge | 11 | ||
Markham | 6 | ||
Mississauga | 35 | ||
Scarborough | 10 | ||
Vaughan | 1 |
Liquid-tight cordgrip made from nylon
Available in black (RAL 9005)
Used where cable is entering or leaving an enclosure.
Accepts a wide range of cable diameters due to large opening and NBR (nitrile rubber) seal.
The strain relief elements tighten in a circular sequence on the sealing ring to give outstanding strain relief without twisting or damaging the cable.
Use the cordgrip with the smallest maximum diameter that will fit your application (see table below).
Nylon locknut and EPDM o-ring included (as shown).
Operating Temperatures:
Static state: -40°C to 100°C (up to 120° instantaneous)
Dynamic state: -20°C to 80°C (up to 100° instantaneous)
Designed to meet NEMA Type 4, 4X, 6, 6P, 12 & 13 - Protection to IP68.
UL94-V2 flammability rating.
UL listed.
Material Nylon
Color Black
Thread Size (D) PG9
Mounting Hole Dia 15mm
Wire Diameter Min.4 mm Max.8 mm
Outer Length (L) 22 mm
Inner Length (T) 8mm