SAYAL Electronics
SAYAL Electronics
SAYAL Electronics
MULTIMETER CLAMP CURRENT SENSOR AC/DC 0-100V AUTO RANGE
Part No: DM-2001
Manufacturer: A.W.SPERRY INSTRUMENTS INC.
Stock No: MJY-DM2001
SKU No:222330
Stock Number: MJY-DM2001    $44.95
$44.95
ea. CAD
FEATURES:
  • Permits AC/DC current measurement up to 60A using a clamp sensor that comes standard with the instrument
  • Open Jaw Current Clamp Sensor for ease of use in crowded cable areas and other tight places
  • Auto-power-save function
  • Continuity Buzzer
  • Data hold function to freeze the readings
  • LCD with a 3400 count full scale bar graph
  • Shock absorbing holster allows easy lead storage
  • Designed to international safety standard IEC61010-1: over-voltage category CAT.III
  • UL listed to both US and Canadian Standards
  • Limited One Year Warranty SPECIFICATIONS
  • Measuring Ranges and Accuracy (at 23C -5C, relative humidity 75% or less)
  • AC Current A MODEL Range Measuring Range Accuracy 2001 100A 0-100.0A 2.0% (50/60Hz)
  • DC Current A MODEL Range Measuring Range Accuracy 2001 100A 0-100.0A 2.0% (50/60Hz)
  • AC Voltage V Input impedance: 10M 3.4V 34V 340V 600V (50-400Hz)
  • DC Voltage V Input impedance: 10M 340mV 3.4V 34V 340V 600V
  • Resistance 340 - 3.4k - 34k - 340k - 3.4M - 24M
  • Frequency Hz 0-3.399kHz / 3.4kHz-10kHz 0.1%
  • Buzzer beeps below 30-10 Ohm (Continuity buzzer works on 340 Ohm range only)
  • Electromagnetic RF field 1 V/m RF transmitters such as mobile telephones may not be used in close proximity.
  • Altitude 2000M (IEC 61000-4-3)
  • AC A/DC A total accuracy = specified accuracy
  • Safety Standard IEC 61010-1 over-voltage category CAT.ְ, 300V, pollution degree 2 over-voltage category CAT.III, 600V, pollution degree 2 IEC 61010-2-031 IEC 61010-2-032 IEC 61326 (EMC)
  • Display Liquid crystal display with maximum reading of 3399 as well as units and annunciator
  • Bar graph with maximum points of 33
  • Over Input Indication OL on the LCD ( Ohms ranges only)
  • Auto-ranging Operation Shifts to the next higher range when bar graph increases to 33 points Shifts to the next lower range when bar graph decreases to 3 points
  • Sample Rate Numeric reading: about 400ms, bar graph: about 20ms
  • Accuracy-insured 23C -5C relative humidity 75% or less Temperature and (without condensation)
  • Humidity Ranges Operating Temperature 0-40C, relative humidity 85% or less and Humidity Range (without condensation)
  • Storage Temperature -20-60C, relative humidity 85% or less and Humidity Range (without condensation)
  • Source Two 1.5VDC R03 (UM-4) AAA batteries
  • Current Consumption Approx. 10mA
  • Power-save Function Shifts to the power-save state about 10 minutes after the last switch operation (current consumption: approx. 10uA)
  • Overload Protection AC/DC current ranges: MODEL2000 AC/DC 72A for 10 seconds AC/DC current ranges: MODEL2001 AC/DC 120A for 10 seconds AC/DC voltage ranges: AC/DC 720V for 10 seconds Resistance ranges: AC/DC 720V for 10 seconds Frequency ranges: AC/DC 720V for 10 seconds
  • Withstand Voltage AC3700V for 1 minute between electrical circuit and housing case
  • Insulation Resistance 10M ohms or greater at 1000V between electrical circuit and housing case
  • Conductor Size MODEL2000 Approx. 6mm diameter max.
  • MODEL2001 Approx. 10mm diameter max.
  • Dimensions MODEL2000 128(L) x 87(W) x 24(D)mm
  • MODEL2001 128(L) x 92(W) x 27(D)mm
  • Weight MODEL2000 Approx. 210g
  • MODEL2001 Approx. 220g
  • Accessories Two R03 (UM-4) AAA batteries
  • Instruction Manual


AC Current 0 to 60 A (50/60Hz) DC Current 0 to 60 A AC Voltage 3.4 V to 600 V (50-400Hz) DC Voltage 340 mV to 600 V Resistance 340 ohm to 24 M Frequency 0 to 10 kHz Continuity buzzer
RELATED PRODUCTS
11 Product(s) found