REMOTE CONTROL 4CH RELAY SWITCH 12V 433MHZ WITH 2 TRANSMITTERS
Part No: 433MHZ 12V 4CH
Manufacturer:
Stock No: 2095-CA1A
SKU No: 258160
Image is for illustrative purposes only. Please refer to product description.
$32.95 CAD
Stock may not be available at all store locations. Inventory quantites can change without notice.
| Burlington | 2 | |
| Cambridge | 2 | |
| Markham | 2 | |
| Mississauga | 1 | |
| Scarborough | 1 | |
| Vaughan | 1 | |
| Warehouse | 2 |
433Mhz Wireless Remote Control Switch DC 12V 4CH Relay Radio Receiver Module With 2pcs Remote Control Transmitters
It is a learning code wireless remote
control switch (receiver), the output way /working way can be changed as
you like, it is easy to match the transmitter. It has 4 Relays which
can make the equipment turn or reverse, on/off and so on come true. The
volume is small and the performance is stable and reliable, high receive
sensitivity.
1. It covers application ranging from simple domestic remote control to autonomous control, like auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial control and security etc.
2. These remote controls are designed to control a wide variety of electronic devices with a wireless signal.
3. Extremely easy to set up and use.
4. Compatible with 2262 / 2260 / 1527 / 2240 etc chip and several code wireless remote control. So it can meet someone's need of choosing the wireless remote control as they like to work with it .
Instructions:
1. Press the learning code, the indicator flash, loosen your finger, press any button of the remote control, the indicator flash 2 times and off, it means you learn it successfully .
2. It can learn more than 12 PCS 2262 or 1527 chip with the different code wireless remote control.
3. remove/clean: press the learning button about 8 seconds , the indicator turn on to off, it means the information that you keep have been removed successfully.
Output working way:
1. Self-lock: connect the JP1 with the cutting out cap.
2. Jog: the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.
3. Inter-lock: Connect the Jp2 with the Cutting out cap,
Jog: press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control).
Self -lock: press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control).
Inter-lock: press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control).
Receiver:
1. Working voltage: DC12V
2. Quiescent condition: Less than 6mA
3. Working temperature: -40°c+80°c
4. Receiver sensitivity: more than -105dBm
5. Working frequency: 433mhz
6. Output voltage: DC and AC is optional
7. Output current: Less than 3A
8. Max load current: 10A
9. Dimensions: 72 x 52 x 26mm
Remote control transmitter:
1. Remote Distance: 200M
2. Operating Voltage: DC 6V
3. Frequency: 433mhz
4. Operating Current: 13 mAh
5. Code Type: Fixed code / Learning code
6. Dimensions: 58 x 39 x 14mm
7. Used battery type: 2016 button battery
Package included:
2 x Transimitter
1 x Receiver
HEAD OFFICE
SAYAL Electronics
3791 Victoria Park Avenue
Toronto, Ontario, Canada
M1W 3K6
placeholder
placeholder
Copyright © 2024 SAYAL Electronics and Hobbies