The NEMA-rated Fiber Splice Tray Wallmount Enclosure enables multiple fiber splicing in a NEMA-rated enclosure. Use it to make fiber cabling transition from outside fiber to indoor fiber cabling. This enclosure is a fully-sealed wallmounted box that can support up to 48 fiber splices using two larger fiber splice trays ([1] JPM440A splice tray is already included). Bulk fiber cabling enters and exits the enclosure through a pair of water-tight grommets. The grommets can be adjusted to support bulk fiber cabling from 8-mm up to 17-mm. Inside is a pair of Kevlar ® clamps to secure bulk fiber cabling to the enclosure. There is ample room inside the enclosure for cabling management as well as identifying the fiber strands. What’s Included • (1) NEMA Rated Enclosure • (1) DANGER sticker • (4) 4-inch cable ties • (4) mounting screws • (2) grommet plugs • (2) grommets – 8-mm to 17-mm (Using smaller Outside Diameter [OD] size) • (6) 1-inch cable organizers • (30) 3-inch cable ties • (1) Splice Tray (part number JPM440A) • (1) set of ID markers – [1][2][3][4] • This user’s manual • (1) cutout wall template • (1) ratchet key • (1) fiber adapter panel ID enclosure sticker

---