Product Details you're searching for are unavailable at this time.
Check out the following Popular Products below.
POPULAR PRODUCTS25 Product(s) found
K000007
ARDUINO STARTER KIT WITH BOOKStock Number:
1811-BF1K000007
ARDUINO STARTER KIT WITH BOOKStock Number:
1811-BF1
ARDUINO STARTER KIT WITH BOOKThis kit walks you through the basics in a hands-on way, with creative projects you build by learning. Thanks to a selection of the most common and useful electronic components with a selection of 15 projects that start from a low complexity, in order...More$179.95 CADAvailable OnlineAvailable in StoresView Details
870135
MOTOR DC 1.2-3VOLTS 10200RPM 2MM SHAFT 6.81G/CM TORQUEStock Number:
2611-BB2870135
MOTOR DC 1.2-3VOLTS 10200RPM 2MM SHAFT 6.81G/CM TORQUEStock Number:
2611-BB2
Specifications:MOTOR DC 1.2-3 VOLTS 10200 RPM 2 MM SHAFT 6.81 G/CM TORQUE...More$3.95 CADAvailable OnlineAvailable in StoresView Details
LS-00025
MOTOR DC 1.5V-3V 5000-10000RPM SHAFT DIA 2MMStock Number:
2611-BB4LS-00025
MOTOR DC 1.5V-3V 5000-10000RPM SHAFT DIA 2MMStock Number:
2611-BB4$6.95 CADAvailable OnlineAvailable in StoresView Details
MOTOR 42000RPM
MOTOR DC 3-3.7V 42000RPM 20MA 6MM DIA 10MM LENGTHStock Number:
2611-BB5MOTOR 42000RPM
MOTOR DC 3-3.7V 42000RPM 20MA 6MM DIA 10MM LENGTHStock Number:
2611-BB5$5.95 CADAvailable OnlineAvailable in StoresView Details
870136
MOTOR DC 3-6VOLTS 17000RPM 2MM SHAFT 20.72G/CM TORQUEStock Number:
2611-CB1870136
MOTOR DC 3-6VOLTS 17000RPM 2MM SHAFT 20.72G/CM TORQUEStock Number:
2611-CB1$3.95 CADAvailable OnlineAvailable in StoresView Details
LS-00024
MOTOR DC MINIATURE 1.5-3 VOLTS 8000-12000RPM SHAFT DIA 2MMStock Number:
2611-CB2LS-00024
MOTOR DC MINIATURE 1.5-3 VOLTS 8000-12000RPM SHAFT DIA 2MMStock Number:
2611-CB2
Small Flat Side Electric Motor 1.5v – 3v DC Suitable for hobby, models, science and other projects. Model: F130 Rated Voltage: 1.5-3V Rated Speed: 8000-12000 RPM Shaft Diameter: 2mm ...More$7.95 CADAvailable OnlineAvailable in StoresView Details
LS-00026
MOTOR DC 3V-6V 8000-12000RPM SHAFT DIA 2MMStock Number:
2611-CD2LS-00026
MOTOR DC 3V-6V 8000-12000RPM SHAFT DIA 2MMStock Number:
2611-CD2
Suitable for hobby, models, science and other projects. Model: R260 Rated Voltage: 3V-6V Rated Speed: 8000-12000 RPM Shaft Diameter: 2mm ...More$7.95 CADAvailable OnlineAvailable in StoresView Details
MOT2N
MOTOR DC 6VDC 14500RPM 250MA 2.5-6VDCStock Number:
2611-FA3MOT2N
MOTOR DC 6VDC 14500RPM 250MA 2.5-6VDCStock Number:
2611-FA3$7.95 CADAvailable OnlineAvailable in StoresView Details
MOTOR DC 1.5-3VStock Number:
2611-FA6
MOTOR DC 1.5-3VStock Number:
2611-FA6$2.95 CADAvailable OnlineAvailable in StoresView Details
MOT3N
MOTOR DC 12V 11500RPM 180MA TORQUE 62.5G/CM 6-14VStock Number:
2611-JB1MOT3N
MOTOR DC 12V 11500RPM 180MA TORQUE 62.5G/CM 6-14VStock Number:
2611-JB1
voltage: operating voltage: 6-14Vnominal: 12Vno load: speed: 11500rpmcurrent: 0.18Aat max. efficiency: speed: 8768rpmcurrent: 0.726Atorque: 62.5gcmoutput: 5.617Weff.: 59.58%stall torque: 307.8gcm...More$11.95 CADAvailable OnlineAvailable in StoresView Details
MOTOR 12-24VDC 4K-8K RPM 7-8MA 38MM LONG 28MM DIA 13 SHAFT DIAStock Number:
2611-LA1
MOTOR 12-24VDC 4K-8K RPM 7-8MA 38MM LONG 28MM DIA 13 SHAFT DIAStock Number:
2611-LA1
High Speed Motor 12V-24V 4000-8000RPM Micro DC Motor 24V 8000RPM.No load 0.08A Stall 2.4A 12V 4000RPM.No load 0.07A Stall 1.5A Motor length:38mm diameter:28mm Shaft length:13mm shaft diameter:2.3mm fix screw hole:M2.5 screw hole distance:16mm...More$12.95 CADAvailable OnlineAvailable in StoresView Details
22140
MOTOR SERVO MODIFIED CONTINUOUS ROTATIONStock Number:
2625-AC122140
MOTOR SERVO MODIFIED CONTINUOUS ROTATIONStock Number:
2625-AC1
What makes "continuous rotation servos" so cool is that all you had to do is plug it into a regular style "Power/Ground/Signal" style RC receiver (or micro-controller) jack, and feed it a 1.5mS signal. 1.5mS means it stayed still. Go down towards 1.0mS, and it would turn one ...More$23.95 CADAvailable OnlineAvailable in StoresView Details
25504
MOTOR SERVO MICRO 3-6VStock Number:
2625-FA125504
MOTOR SERVO MICRO 3-6VStock Number:
2625-FA1
HXT900, one of the most famous and the best value micro servos available. Used by hobbyists worldwide. The HXT900 is the #1 trusted low-cost 9g servo.Features:Plastic Bushing25cm wireCore-less motorServo arms & screw includedSpecs:Size : 21x12x22 mm / 0.74x0.42x0.78 ...More$13.95 CADAvailable OnlineAvailable in StoresView Details
UMTRS-001052
MOTOR SERVO MICRO 4.8-6V 0.6KG-CMStock Number:
2625-FA14UMTRS-001052
MOTOR SERVO MICRO 4.8-6V 0.6KG-CMStock Number:
2625-FA14$9.95 CADAvailable OnlineAvailable in StoresView Details
FS5106R
MOTOR SERVO MICRO 4.8-6V 6KG-CM 0.18SEC/60DEG 360 DEGREEStock Number:
2625-FA15FS5106R
MOTOR SERVO MICRO 4.8-6V 6KG-CM 0.18SEC/60DEG 360 DEGREEStock Number:
2625-FA15
The FS5106R is a standard-sized servo that has been built by FEETECH (formerly known as Fitec) specifically for continuous rotation. At 6 V, it has a maximum rotation speed of 95 RPM (no-load) and can produce up to 83 oz-in (6 kg-cm) of torque. It features two ball bearings on th...More$14.95 CADAvailable OnlineAvailable in StoresView Details
GM4
MOTOR GEAR 3-6V 59RPM GEAR RATIO 325:1 SERVO SHAPEDStock Number:
2625-FA2GM4
MOTOR GEAR 3-6V 59RPM GEAR RATIO 325:1 SERVO SHAPEDStock Number:
2625-FA2
This is a modified GWS05 servo from Grand-Wing Servo. It's a servo body, with servo gears, but with continuous rotation, and no electronics. This a gear motor in a clear servo-case. No circuit board means you get a robust, servo-shaped motor. Each motor comes with a standard ...More$18.95 CADAvailable OnlineAvailable in StoresView Details
2730765
MOTOR SERVO 4.8-6VStock Number:
2625-FA42730765
MOTOR SERVO 4.8-6VStock Number:
2625-FA4
Torque micro: 1.5kg/cm @ 4.8V; 1.8kg/cm @ 6.0V Speed micro: 0.12/60° @ 4.8V; 0.10/60° @ 6.0V Size: Micro 23×11.5×24mm; 8.6g Use angle : 160°...MoreREG.$16.95$12.95 CAD SAVE $4Available OnlineAvailable in StoresView Details
LS-0006
MOTOR SERVO 4.5-6V PLASTIC GEAR ANALOG MEDIUMStock Number:
2625-FB1LS-0006
MOTOR SERVO 4.5-6V PLASTIC GEAR ANALOG MEDIUMStock Number:
2625-FB1
Plastic Gear Analog Servo Operating Speed (at no load)(sec/60deg): 0.12 @ 4.5V 0.1 @ 6V Running current (at no load) 120mA @ 4.5V 140 mA @ 6VStall torque (at locked) 1.0 kg-cm @ 4.5V1.2 kg-cm @ 6VStall current (at locked) 390 mA @ 4.5V 460 mA @ 6VIdle current (at stopped) 4 mA @ ...More$26.95 CADAvailable OnlineAvailable in StoresView Details
LS-5010CR
MOTOR SERVO 4.8-7.2V PLASTIC GEAR 360 DEGStock Number:
2625-GD2LS-5010CR
MOTOR SERVO 4.8-7.2V PLASTIC GEAR 360 DEGStock Number:
2625-GD2
Suitable for hobby, models, science and other projects. Comparable to Servocity # 31311S20Voltage Range: 4.8 – 7.2 VoltsStall Torque (6.0V): 4.1 kg.cmStall Torque (4.8V): 3.2kg.cmJR Wire ConfigurationNo-load Speed (6.0V / 4.8V): 0.19sec/60° / 0.23sec/6...MoreREG.$39.95$34.95 CAD SAVE $5Available OnlineAvailable in StoresView Details
870166
MOTOR AND GEARBOX KIT 1.5-4.5V 1125:1 RATIO 3MM SHAFTStock Number:
2641-BE1870166
MOTOR AND GEARBOX KIT 1.5-4.5V 1125:1 RATIO 3MM SHAFTStock Number:
2641-BE1REG.$25.95$21.95 CAD SAVE $4Available OnlineAvailable in StoresView Details
GM2-2
MOTOR GEAR 6V 48RPM GEAR RATIO 224:1 OFFSET SHAFTStock Number:
2641-FA1-2GM2-2
MOTOR GEAR 6V 48RPM GEAR RATIO 224:1 OFFSET SHAFTStock Number:
2641-FA1-2
Mechanical Features 7mm output shaft with double-flat outputsSecondary output shaft (D) for encoders (not meant for rotational loads)Built-in safety ratchet clutch set for 60 in*oz torque (easily modified for full "locked-up" operation)Built-in mounting holes55x48x22.7mm (2.17x1...More(2 PCS/PKG)$17.95 CADAvailable OnlineAvailable in StoresView Details
GM6-2
MOTOR GEAR 3-6V 160RPM GEAR RATIO 120:1 MINI OFFSETStock Number:
2641-FA4-2GM6-2
MOTOR GEAR 3-6V 160RPM GEAR RATIO 120:1 MINI OFFSETStock Number:
2641-FA4-2
Gear Motor 6 - 120:1 "Baby GM2"The GM6 has tighter tolerances and better performance than a regular toy-style motor. These smaller, quicker 120:1 gear reduction ratio motors are sure to stir ideas!This gear motor starts rotation at 0.58 volts, turning 7RPM drawing only 46.5...More(2 PCS/PKG)$17.95 CADAvailable OnlineAvailable in StoresView Details
GM10
MOTOR GEAR 3-6V 233-454RPM CENTERING PAGER GEAR 81:1Stock Number:
2641-FA8GM10
MOTOR GEAR 3-6V 233-454RPM CENTERING PAGER GEAR 81:1Stock Number:
2641-FA8
Pager Gear Motor (Really tiny!)These little gear motors measure 20.8 x 29.0 x 25.4mm (0.82 x 1.14 x 1.00") and weigh in at 4.7g (0.17oz). The square output shaft measures 3.56mm (0.14") per side, and the leads measure 5cm (1.95") long. They're a bit funky in that they're not co...More$14.95 CADAvailable OnlineAvailable in StoresView Details
MOTOR-371210
MOTOR GEAR 12V 107RPM 6MM SHAFTStock Number:
2641-JA1MOTOR-371210
MOTOR GEAR 12V 107RPM 6MM SHAFTStock Number:
2641-JA1REG.$24.95$19.95 CAD SAVE $5Available OnlineAvailable in StoresView Details
MOTOR-371208
MOTOR GEAR 12V 45RPM 6MM SHAFTStock Number:
2641-JA3MOTOR-371208
MOTOR GEAR 12V 45RPM 6MM SHAFTStock Number:
2641-JA3REG.$24.95$19.95 CAD SAVE $5Available OnlineAvailable in StoresView Details
HEAD OFFICE
SAYAL Electronics
3791 Victoria Park Avenue
Toronto, Ontario, Canada
M1W 3K6
placeholder
placeholder
Copyright © 2026 SAYAL Electronics and Hobbies