Product Details you're searching for are unavailable at this time.
Check out the following Popular Products below.
POPULAR PRODUCTS
32 Product(s) found
2760381
ARDUINO SHIELD-RELAY KIT SPEED RELAY SHEILDStock No.: 1813-RA1
The Relay Shield provides four high quality relay that can control high current loads to Arduino / Seeeduino boards. It also provides NO (Normally Open) / NC (Normally Closed) interface. It could be a nice solution for controlling devices that could not be directly controlled by ...More$19.95Available OnlineAvailable in Stores
2760385
ARDUINO X-BEE SHIELDStock No.: 1813-DA6
The new version of XBee Shield is a standardized and stackable shield compatible with Arduino. You can easily stack any modules from the Bee series onto it, and build a wireless network for your project. In spite of that, it is also equipped with function of level conversion, whi...More$9.95Available OnlineAvailable in Stores
PBB6204ZZ
BALL BEARING ID:20MM OD:47MM LENGTH: 14MMStock No.: KHWA-9820
PBB6204ZZ
BALL BEARING ID:20MM OD:47MM LENGTH: 14MMStock No.: KHWA-9820
$9.95Available OnlineAvailable in Stores
PBB6205ZZ
BALL BEARING ID:25MM OD:52MM LENGTH:15MMStock No.: KHWA-9920
PBB6205ZZ
BALL BEARING ID:25MM OD:52MM LENGTH:15MMStock No.: KHWA-9920
$9.95Available OnlineAvailable in Stores
62164
CANADA SOUVENIR PLASTIC PLAYING CARDStock No.: 6711-CB2
...More$2.95Not Available OnlineAvailable in Stores
4705-P
CAP AC MR 12.5UF 400V RND W/WIRE PLASTIC BODY 1.5X3.5INStock No.: CWB-346
4705-P
CAP AC MR 12.5UF 400V RND W/WIRE PLASTIC BODY 1.5X3.5INStock No.: CWB-346
$9.95Available OnlineAvailable in Stores
MRRC370V35
CAP AC MR 35UF 370V RND 2.07X2.95IN QT 0.250INStock No.: CWC-515
MRRC370V35
CAP AC MR 35UF 370V RND 2.07X2.95IN QT 0.250INStock No.: CWC-515
$21.95Available OnlineAvailable in Stores
CAP LYT RDL 1200UF 10V 10X20MM 105CStock No.: CER-322
CAP LYT RDL 1200UF 10V 10X20MM 105CStock No.: CER-322
$1.50Available OnlineAvailable in Stores
HVDR2025F-2M
DUCT SLOTTED 0.75X1IN 6.5FT 4MM SLOT 1.4MM THINCKNESS GREYStock No.: KFC-1218
HVDR2025F-2M
DUCT SLOTTED 0.75X1IN 6.5FT 4MM SLOT 1.4MM THINCKNESS GREYStock No.: KFC-1218
$6.95Available OnlineAvailable in Stores
S2540C
DUCT SLOTTED 1X1.5INX6.5FT GREY 30PCS/CASEStock No.: KFC-2418A
S2540C
DUCT SLOTTED 1X1.5INX6.5FT GREY 30PCS/CASEStock No.: KFC-2418A
REG.$12.30$9.95 SAVE $2.35Not Available OnlineAvailable in Stores- HVDR2525F-2M
DUCT SLOTTED 1X1IN 6.5FT 4MM SLOT 1.4MM THICKNESS GREYStock No.: KFC-2218
HVDR2525F-2M
DUCT SLOTTED 1X1IN 6.5FT 4MM SLOT 1.4MM THICKNESS GREYStock No.: KFC-2218
$8.45Available OnlineAvailable in Stores 
PRO2093-30 SUPPORT 3D
HDMI TO 2XCAT5E/CAT6 EXT 30M 1080P NON-POWEREDStock No.: ARWC-3956AA
HDMI Extender by CAT5E or CAT6 with Pigtail One pair as a full functional module, plug & play CAT-5e/6 cable can substitute HDMI cable to achieve long distance transmission. Follow the standard of IEEE-568B. Transmission distance can be up to 30 meters for 1080p using UTP c...More$54.95Available OnlineAvailable in Stores
I2CSHD-01
I2C EXPANSION SHIELD LCD DISPLAY & KEYPAD SHIELD FOR ARDUINOStock No.: 1813-KF1
Arduino I2C Expansion Shield The OSEPP I2C Expansion Shield is an Arduino-Compatible daughter (extension) card. It provides easy interconnection with other I2C devices, such as the OSEPP Sensor Modules family. As well, it integrates an I2C switch that provides 4 additional isolat...More$35.95Available OnlineAvailable in Stores
IC SOCKET MACH 64 22.86MMStock No.: DGB-2635-1
IC SOCKET MACH 64 22.86MMStock No.: DGB-2635-1
$6.40Available OnlineAvailable in Stores
LCD-01
LCD DISPLAY PANEL MODULE 16X2 FOR ARDUINO BOARDStock No.: 1814-FD1
The LCD display is a 16 character by 2line(16x2) LCD display. The LCD contains a white LED for backlight display.The viewing angle of 180 degrees.Operating voltage is 5 volts. Input Data: 4-Bits or 8-Bits interface available Display Font: 5 x 8 Dots Power Supply: Single pow...More$12.95Available OnlineAvailable in Stores
277-0328
MOTOR ACCESSORIES MOTORMATEStock No.: 2671-ZA2
MotorMate works with the DC motor. Makes it easy to attach wheels, paper, cardboard, and lots of other materials to the DC motor. Simply slide it on the `D` shape of the shaft. A LEGO axle also fits in the end....More$3.95Available OnlineAvailable in Stores
SCSHD-01
MOTOR AND SERVO SHIELD SUPPORTS 2SERVO+2STEPPER MOTORSStock No.: 1813-MD1
The OSEPP Motor and Servo Shield can plug directly onto the Arduino and Arduino compatible boards. Support for:2 servo motors and 4 bi-directional DC motors with individual 8-bit speed selection OR2 servo motors and 2 stepper motors (uni-polar or bipolar) with single coil, do...More$26.95Available OnlineAvailable in Stores
711
MOTOR DC 4.5-9V 250MAStock No.: 2611-HA1
These are standard '130 size' DC hobby motors. They come with a wider operating range than most toy motors: from 4.5 to 9VDC instead of 1.5-4.5V. This range makes them perfect for controlling with an Adafruit Motor Shield, or with an Arduino where you are more likely to have 5 or...More$3.95Available OnlineAvailable in Stores
870137
MOTOR DC 6-12VOLTS 12500RPM 2MM SHAFT 44.20G/CM TORQUEStock No.: 2611-FB1
870137
MOTOR DC 6-12VOLTS 12500RPM 2MM SHAFT 44.20G/CM TORQUEStock No.: 2611-FB1
$4.95Available OnlineAvailable in Stores
EL292-0045
MOTOR DC MINIATURE 4.5-6 VOLTS 160MA SHAFT LENGTH:6.5MMStock No.: 2611-FA1
Operating range 4.5 - 6.0 Volts DC @ 160 mA Shaft Length 6.5 mm Two terminals for connecting wires or alligator clips. Plastic clip with adhesive backing available. See Stock number 2065-ZA1...More$1.80Available OnlineAvailable in Stores
P48T-KAA-C6C
PATCH PANEL 48PORT CAT6Stock No.: AHP-352A
P48T-KAA-C6C
PATCH PANEL 48PORT CAT6Stock No.: AHP-352A
$83.95Not Available OnlineAvailable in Stores
PN2907A-4
PNP SS GP 60V 800MA TO-92PN2907A-4
PNP SS GP 60V 800MA TO-92(4 PCS/PKG)$1.50Available OnlineAvailable in Stores
CK051
POWER SUPPLY 0-18V/1A REGULATED SUPPLY VOLTAGE 14 TO 16VAC/1AStock No.: 2071-CF1
This small power supply provides a regulated DC voltage adjustable from 0 to 18V with the maximum current adjustable from 0 to 1A. It uses the popular 723 regulator Integrated Circuit in conjunction with 2 transistors to provide a well regulated DC output with current limit and o...More$29.95Not Available OnlineAvailable in Stores
UK182B
POWER SUPPLY REG 0-30V ASSEMBLEDStock No.: 2071-CG3
An excellent quality and fully regulated DC power supply that meets the wide range of power requirements necessary for experimenting, project building and electronic repairs. The output voltage can be adjusted from 0 to 30V with maximum current adjustment from 0 to 1.5A. It is al...More$56.95Available OnlineAvailable in Stores
UK239A
POWER SUPPLY REG 0-30V ASSEMBLEDStock No.: 2071-CG4
This is an "Electronic Laboratory" quality power supply. It is regulated and very reliable. The output voltage is adjustable from 0 to 30V and maximum output current is adjustable from 0 to 2.5A. The circuit incorporates an overload LED indicator. A heat sink is included....More$69.95Not Available OnlineAvailable in Stores
870131
PROPELLER NOSE HOOK 6IN DIA FITS .13 X .35 BASS WOODStock No.: 2669-BD1
870131
PROPELLER NOSE HOOK 6IN DIA FITS .13 X .35 BASS WOODStock No.: 2669-BD1
$1.95Available OnlineAvailable in Stores
182-2096
RASPBERRY PI4 B 4GB RAM USB3.0Stock No.: 1821-GB1B
Raspberry Pi 4 Model BIt offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior-generation Raspberry Pi 3 Model B+, while retaining backwards compatibility and similar power consumption. For the end user, ...More$99.95Available OnlineAvailable in Stores
GCS-3212R
SAW BLADE 12IN 24TEETHStock No.: THK-1271-2
GCS-3212R
SAW BLADE 12IN 24TEETHStock No.: THK-1271-2
(2 PCS/PKG)$5.95Available OnlineAvailable in Stores
SENSHD-01
SENSOR SHIELDStock No.: 1813-PD1
Easily connect Servo motors, Sensors, and Bluetooth/RF modules to your Arduino or Arduino Compatible board. This Sensor Shield provides breakout connectors for standard Servo Motors and various 3-pin Sensors. A 5v DC screw terminal enables you to drive power hungry servo motors w...More$11.95Available OnlineAvailable in Stores
2770137
TINKERKIT ARDUINO COMPATIBLE BASIC KITStock No.: 1815-CA1
The Basic Kit is a pack of different TinkerKit Modules, aimed to start designing interactive enviroments / sensors / prototype interfaces without using the breadboard or the soldering iron. Sensor Shield V.2 contains 7 different Sensors and 5 Actuators, some cables. The Basic Kit...MoreREG.$24.77$14.95 SAVE $9.82Available OnlineAvailable in Stores
VMA412
TOUCH SCREEN 2.8IN FOR ARDUINO UNO/MEGAStock No.: 1813-KC2
resolution: 240 RGB (H) x 320 (V) display driver: ILI9341 V0.7 colour depth: 262 000 colours system interface: 8-bits, 9-bits, 16-bits, 18-bits interface with 8080-I /8080-II series MCU 6-bits, 16-bits, 18-bits RGB interface with graphic contr...More$29.95Available OnlineAvailable in Stores- MAC97A6-2
TRIAC .6A 400V TO92MAC97A6-2
TRIAC .6A 400V TO92(2 PCS/PKG)$1.50Available OnlineAvailable in Stores
placeholder
placeholder
Copyright © 2020 SAYAL Electronics and Hobbies