Product Details you're searching for are unavailable at this time.
Check out the following Popular Products below.
POPULAR PRODUCTS25 Product(s) found
K000007
ARDUINO STARTER KIT WITH BOOKStock Number:
1811-BF1K000007
ARDUINO STARTER KIT WITH BOOKStock Number:
1811-BF1
ARDUINO STARTER KIT WITH BOOKThis kit walks you through the basics in a hands-on way, with creative projects you build by learning. Thanks to a selection of the most common and useful electronic components with a selection of 15 projects that start from a low complexity, in order...More$179.95 CADAvailable OnlineAvailable in StoresView Details
ENCOD-206097
VELOCITY KIT 2 CHANNEL 4.5-5.5V TTL MAX 100KHZStock Number:
1814-ZA6ENCOD-206097
VELOCITY KIT 2 CHANNEL 4.5-5.5V TTL MAX 100KHZStock Number:
1814-ZA6$9.95 CADAvailable OnlineAvailable in StoresView Details
MHUM-01
HUMIDITY & MOISTURE BREAKOUT OPERATING VOLTAGE 3-5VStock Number:
1815-AB1MHUM-01
HUMIDITY & MOISTURE BREAKOUT OPERATING VOLTAGE 3-5VStock Number:
1815-AB1
The Moisture & Humidity breakout measures soil moisture, temperature and humidity. The breakout features the DHT11 humidity sensor for accurate readings of ambient temperature and moisture. The Moisture/Humidity breakout also features two probes used for measuring the moisture le...More$21.95 CADAvailable OnlineAvailable in StoresView Details
X001PQMNEP
FREENOVE ULTRASONIC STARTER KIT FOR RPI BOARD NOT INCLUDEDStock Number:
1821-HH1AX001PQMNEP
FREENOVE ULTRASONIC STARTER KIT FOR RPI BOARD NOT INCLUDEDStock Number:
1821-HH1A$69.95 CADAvailable OnlineAvailable in StoresView Details
CLOCK MECHANISM
CLOCK MECHANISM QUARTZStock Number:
2051-BC3CLOCK MECHANISM
CLOCK MECHANISM QUARTZStock Number:
2051-BC3$6.95 CADAvailable OnlineAvailable in StoresView Details
870135
MOTOR DC 1.2-3VOLTS 10200RPM 2MM SHAFT 6.81G/CM TORQUEStock Number:
2611-BB2870135
MOTOR DC 1.2-3VOLTS 10200RPM 2MM SHAFT 6.81G/CM TORQUEStock Number:
2611-BB2
Specifications:MOTOR DC 1.2-3 VOLTS 10200 RPM 2 MM SHAFT 6.81 G/CM TORQUE...More$3.95 CADAvailable OnlineAvailable in StoresView Details
LS-00025
MOTOR DC 1.5V-3V 5000-10000RPM SHAFT DIA 2MMStock Number:
2611-BB4LS-00025
MOTOR DC 1.5V-3V 5000-10000RPM SHAFT DIA 2MMStock Number:
2611-BB4$6.95 CADAvailable OnlineAvailable in StoresView Details
870136
MOTOR DC 3-6VOLTS 17000RPM 2MM SHAFT 20.72G/CM TORQUEStock Number:
2611-CB1870136
MOTOR DC 3-6VOLTS 17000RPM 2MM SHAFT 20.72G/CM TORQUEStock Number:
2611-CB1$3.95 CADAvailable OnlineAvailable in StoresView Details
LS-00024
MOTOR DC MINIATURE 1.5-3 VOLTS 8000-12000RPM SHAFT DIA 2MMStock Number:
2611-CB2LS-00024
MOTOR DC MINIATURE 1.5-3 VOLTS 8000-12000RPM SHAFT DIA 2MMStock Number:
2611-CB2
Small Flat Side Electric Motor 1.5v – 3v DC Suitable for hobby, models, science and other projects. Model: F130 Rated Voltage: 1.5-3V Rated Speed: 8000-12000 RPM Shaft Diameter: 2mm ...More$7.95 CADAvailable OnlineAvailable in StoresView Details
MOT2N
MOTOR DC 6VDC 14500RPM 250MA 2.5-6VDCStock Number:
2611-FA3MOT2N
MOTOR DC 6VDC 14500RPM 250MA 2.5-6VDCStock Number:
2611-FA3$7.95 CADAvailable OnlineAvailable in StoresView Details
MOTOR 12-24VDC 4K-8K RPM 7-8MA 38MM LONG 28MM DIA 13 SHAFT DIAStock Number:
2611-LA1
MOTOR 12-24VDC 4K-8K RPM 7-8MA 38MM LONG 28MM DIA 13 SHAFT DIAStock Number:
2611-LA1
High Speed Motor 12V-24V 4000-8000RPM Micro DC Motor 24V 8000RPM.No load 0.08A Stall 2.4A 12V 4000RPM.No load 0.07A Stall 1.5A Motor length:38mm diameter:28mm Shaft length:13mm shaft diameter:2.3mm fix screw hole:M2.5 screw hole distance:16mm...More$12.95 CADAvailable OnlineAvailable in StoresView Details
UMTRS-001052
MOTOR SERVO MICRO 4.8-6V 0.6KG-CMStock Number:
2625-FA14UMTRS-001052
MOTOR SERVO MICRO 4.8-6V 0.6KG-CMStock Number:
2625-FA14$9.95 CADAvailable OnlineAvailable in StoresView Details
GM4
MOTOR GEAR 3-6V 59RPM GEAR RATIO 325:1 SERVO SHAPEDStock Number:
2625-FA2GM4
MOTOR GEAR 3-6V 59RPM GEAR RATIO 325:1 SERVO SHAPEDStock Number:
2625-FA2
This is a modified GWS05 servo from Grand-Wing Servo. It's a servo body, with servo gears, but with continuous rotation, and no electronics. This a gear motor in a clear servo-case. No circuit board means you get a robust, servo-shaped motor. Each motor comes with a standard ...More$18.95 CADAvailable OnlineAvailable in StoresView Details
2730765
MOTOR SERVO 4.8-6VStock Number:
2625-FA42730765
MOTOR SERVO 4.8-6VStock Number:
2625-FA4
Torque micro: 1.5kg/cm @ 4.8V; 1.8kg/cm @ 6.0V Speed micro: 0.12/60° @ 4.8V; 0.10/60° @ 6.0V Size: Micro 23×11.5×24mm; 8.6g Use angle : 160°...MoreREG.$16.95$12.95 CAD SAVE $4Available OnlineAvailable in StoresView Details
LS-5010CR
MOTOR SERVO 4.8-7.2V PLASTIC GEAR 360 DEGStock Number:
2625-GD2LS-5010CR
MOTOR SERVO 4.8-7.2V PLASTIC GEAR 360 DEGStock Number:
2625-GD2
Suitable for hobby, models, science and other projects. Comparable to Servocity # 31311S20Voltage Range: 4.8 – 7.2 VoltsStall Torque (6.0V): 4.1 kg.cmStall Torque (4.8V): 3.2kg.cmJR Wire ConfigurationNo-load Speed (6.0V / 4.8V): 0.19sec/60° / 0.23sec/6...MoreREG.$39.95$34.95 CAD SAVE $5Available OnlineAvailable in StoresView Details
GM6-2
MOTOR GEAR 3-6V 160RPM GEAR RATIO 120:1 MINI OFFSETStock Number:
2641-FA4-2GM6-2
MOTOR GEAR 3-6V 160RPM GEAR RATIO 120:1 MINI OFFSETStock Number:
2641-FA4-2
Gear Motor 6 - 120:1 "Baby GM2"The GM6 has tighter tolerances and better performance than a regular toy-style motor. These smaller, quicker 120:1 gear reduction ratio motors are sure to stir ideas!This gear motor starts rotation at 0.58 volts, turning 7RPM drawing only 46.5...More(2 PCS/PKG)$17.95 CADAvailable OnlineAvailable in StoresView Details
GM10
MOTOR GEAR 3-6V 233-454RPM CENTERING PAGER GEAR 81:1Stock Number:
2641-FA8GM10
MOTOR GEAR 3-6V 233-454RPM CENTERING PAGER GEAR 81:1Stock Number:
2641-FA8
Pager Gear Motor (Really tiny!)These little gear motors measure 20.8 x 29.0 x 25.4mm (0.82 x 1.14 x 1.00") and weigh in at 4.7g (0.17oz). The square output shaft measures 3.56mm (0.14") per side, and the leads measure 5cm (1.95") long. They're a bit funky in that they're not co...More$14.95 CADAvailable OnlineAvailable in StoresView Details
MOTOR-371210
MOTOR GEAR 12V 107RPM 6MM SHAFTStock Number:
2641-JA1MOTOR-371210
MOTOR GEAR 12V 107RPM 6MM SHAFTStock Number:
2641-JA1REG.$24.95$19.95 CAD SAVE $5Available OnlineAvailable in StoresView Details
MOTOR-371208
MOTOR GEAR 12V 45RPM 6MM SHAFTStock Number:
2641-JA3MOTOR-371208
MOTOR GEAR 12V 45RPM 6MM SHAFTStock Number:
2641-JA3REG.$24.95$19.95 CAD SAVE $5Available OnlineAvailable in StoresView Details
2770334
LITTLEBITS VIBRATION MOTORStock Number:
2643-AA12770334
LITTLEBITS VIBRATION MOTORStock Number:
2643-AA1
The vibration motor is very similar to the device that makes your cellphone shake when you get a text. With this module, you can make anything vibrate and buzz! This module also includes the vibeSnap-- an accessory that helps you attach stuff - like paper, tin foil, or a pipeclea...More$9.95 CADAvailable OnlineAvailable in StoresView Details
870266
BUILD A MODEL MOTOR KIT PLASTIC BASEStock Number:
2665-ZF2870266
BUILD A MODEL MOTOR KIT PLASTIC BASEStock Number:
2665-ZF2
This DC motor kit will bring hours of learning and fun to your students. Made from pre-cut quality plywood, this motor features two magnets and a unique coil winding assembly. Its operation is whisper smooth. Requires [2] 'AA' batteries....More$23.95 CADAvailable OnlineAvailable in StoresView Details
870174
O-RING NEOPRENE 1-3/16ID 1-1/2ID 2PCS EACH 4PCS/SET TIRESStock Number:
2667-AA2870174
O-RING NEOPRENE 1-3/16ID 1-1/2ID 2PCS EACH 4PCS/SET TIRESStock Number:
2667-AA2$3.95 CADAvailable OnlineAvailable in StoresView Details
70145
NARROW TIRE SET 58MM DIAMETERStock Number:
2667-WD170145
NARROW TIRE SET 58MM DIAMETERStock Number:
2667-WD1
This set includes a pair of narrow tires which can help reduce the footprint of your project. The tires are made of solid synthetic rubber and are ideal for heavy-duty applications. Two types of wheel hubs are also included to enable these tires to be used with both Educational C...More$9.95 CADAvailable OnlineAvailable in StoresView Details
870146
WHEEL ADAPTER TO CD FITS 6.3MM DOWEL ROD CHANGE ANY CD TO WHEELStock Number:
2668-AA3870146
WHEEL ADAPTER TO CD FITS 6.3MM DOWEL ROD CHANGE ANY CD TO WHEELStock Number:
2668-AA3(4 PCS/PKG)$3.95 CADAvailable OnlineAvailable in StoresView Details
870140
WHEEL FRONT 1.37IN WITH END CAP FITS 3MM AXLEStock Number:
2668-CA3870140
WHEEL FRONT 1.37IN WITH END CAP FITS 3MM AXLEStock Number:
2668-CA3(4 PCS/PKG)$3.95 CADAvailable OnlineAvailable in StoresView Details
HEAD OFFICE
SAYAL Electronics
3791 Victoria Park Avenue
Toronto, Ontario, Canada
M1W 3K6
placeholder
placeholder
Copyright © 2026 SAYAL Electronics and Hobbies