Product Details you're searching for are unavailable at this time.
Check out the following Popular Products below.
POPULAR PRODUCTS25 Product(s) found
PR6602X
MODULAR PLUG 6P6C STD RNDStock Number:
AKA-106A-10PR6602X
MODULAR PLUG 6P6C STD RNDStock Number:
AKA-106A-10(10 PCS/PKG)$3.95 CADAvailable OnlineAvailable in StoresView Details
BSQA-5219-1
LED3 BICOL RED/GRN HOUS RA 2PINBSQA-5219-1
LED3 BICOL RED/GRN HOUS RA 2PIN$2.95 CADAvailable OnlineAvailable in StoresView Details
1591CSFLBK
PROJECT BOX 4.7X2.5X1.6IN PLAS BLACK WITH FLANGED LIDStock Number:
NARJ-2211AA1591CSFLBK
PROJECT BOX 4.7X2.5X1.6IN PLAS BLACK WITH FLANGED LIDStock Number:
NARJ-2211AA$7.95 CADAvailable OnlineAvailable in StoresView Details
1455C1201
PROJECT BOX 4.7X2.1X.9IN ALUMINStock Number:
NDDJ-2009-11455C1201
PROJECT BOX 4.7X2.1X.9IN ALUMINStock Number:
NDDJ-2009-1$23.95 CADAvailable OnlineAvailable in StoresView Details
V-01G335-1C22-K
MICRO SWITCH 1P2T NO/NC 28X16MM 18MM BENT LEVER 0.1A 125VAC QTStock Number:
SGFP-4330V-01G335-1C22-K
MICRO SWITCH 1P2T NO/NC 28X16MM 18MM BENT LEVER 0.1A 125VAC QTStock Number:
SGFP-4330$35.00 CADAvailable OnlineAvailable in StoresView Details
LT-10
MAGNIFIER FOLDABLE 11.5X 15MM FOCUSING LIGHTED W/CASEStock Number:
TMMC-5318LT-10
MAGNIFIER FOLDABLE 11.5X 15MM FOCUSING LIGHTED W/CASEStock Number:
TMMC-5318$21.95 CADAvailable OnlineAvailable in StoresView Details
900-230
FLUX DISPENSER .01 NEEDLEStock Number:
QJS-2111-2900-230
FLUX DISPENSER .01 NEEDLEStock Number:
QJS-2111-2(2 PCS/PKG)$4.95 CADAvailable OnlineAvailable in StoresView Details
A000057
ARDUINO LEONARDO WITH HEADERSStock Number:
1811-HA1A000057
ARDUINO LEONARDO WITH HEADERSStock Number:
1811-HA1
The Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset...More$44.95 CADAvailable OnlineAvailable in StoresView Details
A000066
ARDUINO UNO REV3 MICROCONTROLLER ATMEGA328PStock Number:
1811-AA1BA000066
ARDUINO UNO REV3 MICROCONTROLLER ATMEGA328PStock Number:
1811-AA1B
ARDUINO UNO REV3 Micro-ControllerThe UNO is the best board to get started with electronics and coding. If this is your first experience tinkering with the platform, the UNO is the most robust board you can start playing with. The UNO is the most used and documented board of the w...More$56.95 CADAvailable OnlineAvailable in StoresView Details
DEV-11201
LILYPAD PROTOSNAP DEVELOPMENT BOARD COMPATIBLE WITH ARDUINOStock Number:
1811-SA2DEV-11201
LILYPAD PROTOSNAP DEVELOPMENT BOARD COMPATIBLE WITH ARDUINOStock Number:
1811-SA2
The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single board, which makes it easy to explore the possibilities of the components before snapping them apart and building them into your project. The ProtoSnap Li...More$74.95 CADAvailable OnlineAvailable in StoresView Details
0274-SPF-3.3V
PRO MINI 328 3.3V 8MHZStock Number:
1811-PA1B0274-SPF-3.3V
PRO MINI 328 3.3V 8MHZStock Number:
1811-PA1B
The Arduino Pro Mini is a microcontroller board based on the ATmega168 (datasheet). Runs at 3.3V and 8 MHz. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A s...More$24.95 CADAvailable OnlineAvailable in StoresView Details
110030
ARDUINO ETHERNET SHIELD REV 3 WITHOUT POE MODULEStock Number:
1813-DF1A110030
ARDUINO ETHERNET SHIELD REV 3 WITHOUT POE MODULEStock Number:
1813-DF1A
The Arduino Ethernet Shield connects your Arduino to the internet in mere minutes. Just plug this module onto your Arduino board, connect it to your network with an RJ45 cable (not included) and follow a few simple instructions to start controlling your world through the internet...MoreREG.$29.95$24.95 CAD SAVE $5Available OnlineAvailable in StoresView Details
1986
RIBBON CABLE 40P TO 26P FOR RASPBERRY A+/B+/PI 2 GPIO CABLEStock Number:
1821-QA21986
RIBBON CABLE 40P TO 26P FOR RASPBERRY A+/B+/PI 2 GPIO CABLEStock Number:
1821-QA2
you got a Raspberry Pi Model A+ or B+ that you want to have work with some old kit or plate or breakout or something and it uses the classic 26-pinout. Very frustrating, it is...unless you have this ingenious 'downgrade' GPIO cable. It has a 40-pin socket on one end, but only the...More$5.95 CADAvailable OnlineAvailable in StoresView Details
2760153
PROPELLER DEVELOPMENT BOARD SCHMART MODULEStock Number:
1815-PA12760153
PROPELLER DEVELOPMENT BOARD SCHMART MODULEStock Number:
1815-PA1
NOTE: This board does not include the Parallax Propeller Chip, memory and the optional crystal. You hand solder these parts using SchmartBoard|ez technology which makes soldering easy and flawless(and some headers which are included). The Propeller chip makes it easy to rap...MoreREG.$9.95$6.95 CAD SAVE $3Available OnlineAvailable in StoresView Details
2167
ADAFRUIT IR BREAK BEAM SENSOR 3MM LEDSStock Number:
1815-SA22167
ADAFRUIT IR BREAK BEAM SENSOR 3MM LEDSStock Number:
1815-SA2
Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a receiver across the way which is sensitive to that same light. When something passes between the two, and its not tran...More$8.95 CADAvailable OnlineAvailable in StoresView Details
1330
THERMO ELECTRIC COOLER MODULE PELTIER 12V 5AStock Number:
1815-TA11330
THERMO ELECTRIC COOLER MODULE PELTIER 12V 5AStock Number:
1815-TA1
Keep it cool with a Peltier module. These unique electronic components can generate a temperature differential when powered. That is to say, apply 12V to the red (positive) and black (negative) wires and one side will get cold while the other side gets hot. For best results, you'...More$24.95 CADAvailable OnlineAvailable in StoresView Details
WPM404
DC-DC VOLTAGE STEP-DOWN MODULE O/P 1.25 TO35VDC I/P 3 TO 4VDCStock Number:
1814-NA2WPM404
DC-DC VOLTAGE STEP-DOWN MODULE O/P 1.25 TO35VDC I/P 3 TO 4VDCStock Number:
1814-NA2
DC-DC ADJUSTABLE VOLTAGE STEP DOWN MODULE LM2596S Specifications input voltage: 3 to 40 VDCoutput voltage: 1.25 to 35 VDCmax. output current: 2.5 Ach...More$13.95 CADAvailable OnlineAvailable in StoresView Details
WPI405
RFID READ AND WRITE MODULE COMPATIBLE WITH ARDUINOStock Number:
1814-GB1WPI405
RFID READ AND WRITE MODULE COMPATIBLE WITH ARDUINOStock Number:
1814-GB1
This RFID module allows to both read and write MiFare-type RFID cards. Operating Voltage: 3.3 VDC working current: 13 to 26 mA sleep current: < 80 uA peak current: < 30 mA working frequency: 13.56 MHz Supported card types : Mifare cards Interface / protocol: SPI Control...More$19.95 CADAvailable OnlineAvailable in StoresView Details
1089
PROGRAMMING THE RASPBERRY PI GETTING STARTED WITH PYTHONStock Number:
1817-AB11089
PROGRAMMING THE RASPBERRY PI GETTING STARTED WITH PYTHONStock Number:
1817-AB1
Program your own Raspberry Pi projects using Python!An updated guide to programming your own Raspberry Pi projects. Learn to create inventive programs and fun games on your powerful Raspberry Pi--with no programming experience required. This practical book has been revised to ful...More$34.95 CADAvailable OnlineAvailable in StoresView Details
83270
TRAVEL RAIN PONCHO REUSABLE W/ HOOD & CORD ONE SIZE FITS ALLStock Number:
YBAB-626683270
TRAVEL RAIN PONCHO REUSABLE W/ HOOD & CORD ONE SIZE FITS ALLStock Number:
YBAB-6266$3.95 CADAvailable OnlineAvailable in StoresView Details
VMA105
ATMEGA32U4 WEARABLE DEVLOPMENT BOARD ARDUINO LILYPAD COMPATIBLEStock Number:
1811-SA4VMA105
ATMEGA32U4 WEARABLE DEVLOPMENT BOARD ARDUINO LILYPAD COMPATIBLEStock Number:
1811-SA4
This wearable development board can be used on textiles as well as sensors, actuators and similarly mounted power supplies. Features 100% compatible with Arduino® Liliypad Specifications microcontroller: ATmega32U4 operating voltage: 2.7 - 5.5 VDC inp...More$28.95 CADAvailable OnlineAvailable in StoresView Details
WPM331
RELAY MODULE 1 CHANNEL W/TOUCH BISTABLE SWITCH 12VStock Number:
1814-JB4WPM331
RELAY MODULE 1 CHANNEL W/TOUCH BISTABLE SWITCH 12VStock Number:
1814-JB4
supply voltage: 12 VDC supply current: 15 - 50 mA trigger current: 0.5 mA contact rating: 10 A 250 VAC / 10 A 30 VDC ...More$15.95 CADAvailable OnlineAvailable in StoresView Details
WPA509
ACCESSORIES KIT WITH CLEAR PLASTIC BOX COMPATIBLE W/ARDUINOStock Number:
1817-ZE1WPA509
ACCESSORIES KIT WITH CLEAR PLASTIC BOX COMPATIBLE W/ARDUINOStock Number:
1817-ZE1
Included in this assortment:210 piece resistor set. 30 each value ( 100R, 4K7, 1K, 10k, 47K, 100K, 1M ) 4 x 50K potentiometer (K047AM) 5 x red LED 5 mm 5 x green LED 5 mm 5 x yellow LED 5 mm 6 x key button 4-pin 12 x 12 mm 9 x round cap for 4-pin key button 6 x square cap fo...More$12.95 CADAvailable OnlineAvailable in StoresView Details
A000079
ARDUINO MOTOR SHIELD REV3Stock Number:
1813-MF1BA000079
ARDUINO MOTOR SHIELD REV3Stock Number:
1813-MF1B
The Arduino Motor Shield is based on the L298 (datasheet), which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your Arduino board, controlling the speed and direction of...More$42.95 CADAvailable OnlineAvailable in StoresView Details
WPM327
END-STOP SWITCH MODULEStock Number:
1814-JA3-2WPM327
END-STOP SWITCH MODULEStock Number:
1814-JA3-2
Features robot bump switchend stop switch that can be used for many purposesmounts on your robot project or 3d printermechanical limit switch acts as a bump stop sensor2 mounting holes on the board Specifications operating voltage: ...More(2 PCS/PKG)$13.95 CADAvailable OnlineAvailable in StoresView Details
HEAD OFFICE
SAYAL Electronics
3791 Victoria Park Avenue
Toronto, Ontario, Canada
M1W 3K6
placeholder
placeholder
Copyright © 2025 SAYAL Electronics and Hobbies