APOLLO LUNAR MODULE METAL EARTH 3D LASER CUT MODEL
Part No: MMS078
Manufacturer: FASCINATIONS TOYS & GIFTS
Stock No: 5194-ZB40
SKU No: 237573
.jpg)
(1).jpg)
(2).jpg)
(3).jpg)
(4).jpg)
Image is for illustrative purposes only. Please refer to product description.
$19.95 CAD
Stock may not be available at all store locations. Inventory quantites can change without notice.
| Burlington | 2 | |
| Cambridge | 2 | |
| Markham | 1 | |
| Mississauga | 1 | |
| Scarborough | 1 | |
| Vaughan | 1 |
Apollo Lunar Module
The Lunar Lander (LEM) was a two stage spacecraft that was used to carry a crew of two astronauts from the orbiter to the surface of the moon and back.
The descent stage housed the landing gear, engine and all the fuel needed to land safely on the moon. It also served as the launch pad for the ascent stage to return back to the orbiter and subsequent trip back to the Earth.
Six lunar modules were successfully landed on the Moon between 1969 and 1972 during the Apollo Space Program.
It was the lunar module of Apollo 13 that saved the lives of the three astronauts on board, with its engine replacing the crippled CSM Service Propultion System engine, and the batteries supplying power not only for the return trip to Earth, but also to recharge the Command Module's batteries, which were critical for the re-entry.
It managing to support 3 astronauts for 90 hours, despite being rated to support only 2 astronauts for 45hrs.
The Lunar Module has been immortalized in this Metal Earth 3D laser cut steel model. Fully assembled, the model is approximately 2" in length and 2" wide and 4" high.
RELATED PRODUCTS6 Product(s) found
MMS077C1
MARS ROVER METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB39MMS077C1
MARS ROVER METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB39
Launched separately in 2003, NASA's Mars Exploration Rover Mission involved a pair of twin rovers, named Spirit and Opportunity, which landed three weeks apart on the martian surface in January of 2004. The twins managed to make a number of important discoveries about possible we...More$18.95 CADAvailable OnlineAvailable in StoresView Details
MMS015
SPACE SHUTTLE ATLANTIS METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB76MMS015
SPACE SHUTTLE ATLANTIS METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB76
3D METAL MODEL KIT Easy to assemble. Simply snip out the pieces and bend the tabs through the corresponding connection points. Tweezers or small needle nose pliers are suggested to facilitate assembly.(not included) Facts: Was the fourth shuttle built and the last one...More$10.95 CADAvailable OnlineAvailable in StoresView Details
MMS015D
SPACE SHUTTLE DISCOVERY METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB82MMS015D
SPACE SHUTTLE DISCOVERY METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB82
3D METAL MODEL KIT Easy to assemble. Simply snip out the pieces and bend the tabs through the corresponding connection points. Tweezers or small needle nose pliers are suggested to facilitate assembly.(not included) Facts: Its maiden voyage was on August 30, 1984. Sin...More$10.95 CADAvailable OnlineAvailable in StoresView Details
MMS094
APOLLO LUNAR ROVER TWO SHEET METAL EARTH 3D LASER MODEL KITStock Number:
5194-ZB122MMS094
APOLLO LUNAR ROVER TWO SHEET METAL EARTH 3D LASER MODEL KITStock Number:
5194-ZB122
Apollo Lunar RoverThe Lunar Roving Vehicle (LRV) or lunar rover was a battery-powered four-wheeled rover used on the Moon in the last three missions of the American Apollo program (15, 16, and 17) during 1971 and 1972. The rovers were designed with a top speed of about 8 mph (13 ...More$16.95 CADAvailable OnlineAvailable in StoresView Details
MMS168
APOLLO CSM WITH LM METAL EARTH 3.5 SHEET MODEL KITStock Number:
5194-ZB247MMS168
APOLLO CSM WITH LM METAL EARTH 3.5 SHEET MODEL KITStock Number:
5194-ZB247
Apollo CSM with LMThe Apollo 11 moon landing required two spacecraft- The lunar module (LM) and command service module (CSM).Once in lunar orbit, the two would separate so the LM could land while the CSM waited in orbit. After launching from the lunar surface, the LM’s ascent s...More$27.95 CADAvailable OnlineAvailable in StoresView Details
MMS167
APOLLO SATURN V METAL EARTH 2 SHEET MODELStock Number:
5194-ZB249MMS167
APOLLO SATURN V METAL EARTH 2 SHEET MODELStock Number:
5194-ZB249
Apollo Saturn V with GantrySaturn V: President Kennedy said, “we choose to go to the moon” The Saturn V is how we got there! This 3-stage expendable rocket was developed by NASA to support the US Apollo space program between 1967 and 1973. The “V” referenced the five gian...More$19.95 CADAvailable OnlineAvailable in StoresView Details
HEAD OFFICE
SAYAL Electronics
3791 Victoria Park Avenue
Toronto, Ontario, Canada
M1W 3K6
placeholder
placeholder
Copyright © 2024 SAYAL Electronics and Hobbies