BOEING 747 METAL EARTH 3D LASER CUT MODEL
Part No: MMS004
Manufacturer: FASCINATIONS TOYS & GIFTS
Stock No: 5194-ZB73
SKU No: 239200
.jpg)
(1).jpg)
(2).jpg)
(3).jpg)
(4).jpg)
Image is for illustrative purposes only. Please refer to product description.
$11.95 CAD
Stock may not be available at all store locations. Inventory quantites can change without notice.
| Burlington | 2 | |
| Cambridge | 1 | |
| Markham | 1 | |
| Mississauga | 1 | |
| Scarborough | 1 | |
| Vaughan | 1 | |
| Warehouse | 4 |
3D METAL MODEL KIT
Easy to assemble. Simply snip out the pieces and bend the tabs through the corresponding connection points.
Tweezers or small needle nose pliers are suggested to facilitate assembly.(not included)
Facts:
The largest airliners are wide-body jets. Some aircraft in this category are the Boeing 747, Airbus A330, Lockheed L-1011 TriStar, McDonnell Douglas DC-10 and MD-11. These aircraft are usually used for long-haul flights between airline hubs and major cities with many passengers.
RELATED PRODUCTS16 Product(s) found
MMS003
MUSTANG P-51 METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB3MMS003
MUSTANG P-51 METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB3
The P-51 Mustang was a long-range World War II fighter aircraft that flew as a bomber escort over Germany. Powered with the British Rolls-Royce Merlin engine, it was unmatched by any other piston fighter aircraft of World War II. This Metal 3D Laser Cut Model is different from...More$10.95 CADAvailable OnlineAvailable in StoresView Details
MMS011
HUEY UH1 METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB4MMS011
HUEY UH1 METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB4
The most famous helicopter in the world is the Bell UH-1 Iroquois, most commonly referred to as the Huey which first flew in 1956. It earned its fame during the Vietnam War and has been featured in many war movies, including Apocalypse Now and Platoon, as well as in numerous acti...More$10.95 CADAvailable OnlineAvailable in StoresView Details
MMS005C1
FOKKER D-VII METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB21MMS005C1
FOKKER D-VII METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB21
These amazing do-it-yourself models from Metal Earth start as 4-inch square steel sheets and finish as amazing 3-D models. Use the easy to follow instructions to pop out the pieces, bend the tabs, and connect! Manfred von Richthofen praised this aircraft as the best he had flo...More$10.95 CADAvailable OnlineAvailable in StoresView Details
MMS042
WRIGHT BROTHERS AIRPLANE METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB22MMS042
WRIGHT BROTHERS AIRPLANE METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB22
These amazing do-it-yourself models from Metal Earth start as 4-inch square steel sheets and finish as amazing 3-D models. Use the easy to follow instructions to pop out the pieces, bend the tabs, and connect! On December 17, 1903, Orville Wright piloted the first powered airp...More$10.95 CADAvailable OnlineAvailable in StoresView Details
MMS050
F-22 RAPTOR METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB41MMS050
F-22 RAPTOR METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB41
This intricate model kit from Metal Earth allows you to construct the best overall fighter in the world today - the F-22 Raptor. The F-22 is a stealth is a single-seat, twin-engine fifth-generation supermaneuverable fighter aircraft. But you won't have to worry about it's stealth...More$11.95 CADAvailable OnlineAvailable in StoresView Details
MMS066C1
DE HAVILLAND TIGER MOTH.. METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB23MMS066C1
DE HAVILLAND TIGER MOTH.. METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB23
DE HAVILLAND TIGER MOTH Is a 1930s biplane designed by Geoffrey de Havi...More$10.95 CADAvailable OnlineAvailable in StoresView Details
MMS064
DRAGONFLY METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB14MMS064
DRAGONFLY METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB14
Dragonflies are among the fastest flying insects in the world capable of attaining speeds of more than 40 miles per hour. They are important predators that eat mosquitoes, and other small insects like flies, bees, ants and wasps. They are usually found around marshes, lakes, pond...More$11.95 CADAvailable OnlineAvailable in StoresView Details
MMS028
MITSUBISHI ZERO METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB81MMS028
MITSUBISHI ZERO METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB81
3D METAL MODEL KIT Easy to assemble. Simply snip out the pieces and bend the tabs through the corresponding connection points. Tweezers or small needle nose pliers are suggested to facilitate assembly.(not included) Facts: The Mitsubishi Zero is a long-range fighter a...More$11.95 CADAvailable OnlineAvailable in StoresView Details
MMS035C1
F4U CORSAIR METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB25MMS035C1
F4U CORSAIR METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB25
3D METAL MODEL KIT Easy to assemble. Simply snip out the pieces and bend the tabs through the corresponding connection points. Tweezers or small needle nose pliers are suggested to facilitate assembly.(not included) Facts: The most capable carrier based fighter-bomber...More$11.95 CADAvailable OnlineAvailable in StoresView Details
MMS043
SPIRIT OF SAINT LOUIS METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB27MMS043
SPIRIT OF SAINT LOUIS METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB27
3D METAL MODEL KIT Easy to assemble. Simply snip out the pieces and bend the tabs through the corresponding connection points. Tweezers or small needle nose pliers are suggested to facilitate assembly.(not included) Facts: The Spirit of Saint Louis was the first airpl...More$10.95 CADAvailable OnlineAvailable in StoresView Details
MMS045
CESSNA SKYHAWK METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB28MMS045
CESSNA SKYHAWK METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB28
3D METAL MODEL KIT Easy to assemble. Simply snip out the pieces and bend the tabs through the corresponding connection points. Tweezers or small needle nose pliers are suggested to facilitate assembly.(not included) Facts: A four-seat, single-engine, high-wing, fixed-...More$11.95 CADAvailable OnlineAvailable in StoresView Details
MMS062
SR-71 BLACKBIRD METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB30MMS062
SR-71 BLACKBIRD METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB30
3D METAL MODEL KIT Easy to assemble. Simply snip out the pieces and bend the tabs through the corresponding connection points. Tweezers or small needle nose pliers are suggested to facilitate assembly.(not included) Facts: Was a long-range, Mach 3.5+ strategic reconna...More$11.95 CADAvailable OnlineAvailable in StoresView Details
MMS063
GRAF ZEPPELIN 3D LASER CUT MODEL 2SHEETSStock Number:
5194-ZB47MMS063
GRAF ZEPPELIN 3D LASER CUT MODEL 2SHEETSStock Number:
5194-ZB47
3D METAL MODEL KIT Easy to assemble. Simply snip out the pieces and bend the tabs through the corresponding connection points. Tweezers or small needle nose pliers are suggested to facilitate assembly.(not included) Facts: Was a hydrogen-filled, rigid airship which op...More$16.95 CADAvailable OnlineAvailable in StoresView Details
MMS067C1
AVRO LANCASTER BOMBER METAL EARTH 3D LASER CUT MODEStock Number:
5194-ZB71MMS067C1
AVRO LANCASTER BOMBER METAL EARTH 3D LASER CUT MODEStock Number:
5194-ZB71
3D METAL MODEL KIT.Easy to assemble. Simply snip out the pieces and bend the tabs through the corresponding connection points..Tweezers or small needle nose pliers are suggested to facilitate assembly.(not included).Facts:Is a British four-engine heavy bomber used by the RAF in W...More$10.95 CADAvailable OnlineAvailable in StoresView Details
MMS065
F35 LIGHTNING II METAL EARTH 3D LASER CUT MODELSStock Number:
5194-ZB79MMS065
F35 LIGHTNING II METAL EARTH 3D LASER CUT MODELSStock Number:
5194-ZB79
3D METAL MODEL KIT Easy to assemble. Simply snip out the pieces and bend the tabs through the corresponding connection points. Tweezers or small needle nose pliers are suggested to facilitate assembly.(not included) Facts: Is a family of single-seat, single-engine, fi...More$11.95 CADAvailable OnlineAvailable in StoresView Details
MMS110
WWII SUPERMARINE SPITFIRE METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB201MMS110
WWII SUPERMARINE SPITFIRE METAL EARTH 3D LASER CUT MODELStock Number:
5194-ZB201
The most widely produced and strategically important British single-seat fighter of World War II. The Spitfire, renowned for winning victory laurels in the Battle of Britain (1940-41), served in every theatre of the war and was produced in more variants than any other British air...More$11.95 CADAvailable OnlineAvailable in StoresView Details
HEAD OFFICE
SAYAL Electronics
3791 Victoria Park Avenue
Toronto, Ontario, Canada
M1W 3K6
placeholder
placeholder
Copyright © 2024 SAYAL Electronics and Hobbies