SHIELDS COMPATIBLE WITH ARDUINO37 Product(s) found
PROTO-01
PROTO SHIELD COMPATIBLE WITH ARDUINOStock Number:
1813-AB1PROTO-01
PROTO SHIELD COMPATIBLE WITH ARDUINOStock Number:
1813-AB1
Proto Shield This Prototyping shield brings a small prototyping area to your Arduino for you to build your projects on. It includes two general purpose LEDs with resistors ready to use, just connect the anode pin to your Arduino. Also includes a user push-button with a pull-up...More$16.95 CADAvailable OnlineAvailable in StoresView Details
715
ADAFRUIT 12C CONTROLLED + KEYPAD SHIELD KIT FOR 16X2 LCDStock Number:
1813-BA1715
ADAFRUIT 12C CONTROLLED + KEYPAD SHIELD KIT FOR 16X2 LCDStock Number:
1813-BA1
Dimensions: 2.1" x 3.2" For use with 16x2 Character displays Plug and play with any Arduino 'classic' - UNO, duemilanove, diecimilla, etc as well as Arduino Mega R3. Uses only the I2C pins - Analog 4 & 5 on classic Arduinos, Digital 20 and 21 on Arduino Mega R3 This b...More$23.95 CADAvailable OnlineAvailable in StoresView Details
886
ETHERNET BOARD MICRO COMPATIBLE WITH ARDUINO UNOStock Number:
1813-DA11886
ETHERNET BOARD MICRO COMPATIBLE WITH ARDUINO UNOStock Number:
1813-DA11
This is an Ethernet Board that plugs directly into any Arduino UNO or other Arduino Board, allowing it to connect to the internet through an Ethernet connection. This allows you to control the Arduino through the internet, allowing it to post to the internet, and react to infor...More$15.95 CADAvailable OnlineAvailable in StoresView Details
1697
BLUEFRUIT LE-BLUETOOTH LOW ENERGY(BLE4)-NRF8001 BRKOUT V1.0Stock Number:
1813-DA41697
BLUEFRUIT LE-BLUETOOTH LOW ENERGY(BLE4)-NRF8001 BRKOUT V1.0Stock Number:
1813-DA4
Adafruit Bluefruit LE (Bluetooth Smart, Bluetooth Low Energy, Bluetooth 4.0) nRF8001 Breakout allows you to establish an easy to use wireless link between your Arduino and any compatible iOS or Android (4.3+) device. It works by simulating a UART device beneath the surface, sendi...MoreREG.$31.95$28.95 CAD SAVE $3Available OnlineAvailable in StoresView Details
2760385
X-BEE SHIELD COMPATIBLE WITH ARDUINOStock Number:
1813-DA62760385
X-BEE SHIELD COMPATIBLE WITH ARDUINOStock Number:
1813-DA6
The new version of XBee Shield is a standardized and stackable shield compatible with Arduino. You can easily stack any modules from the Bee series onto it, and build a wireless network for your project. In spite of that, it is also equipped with function of level conversion, whi...More$9.95 CADAvailable OnlineAvailable in StoresView Details
2760380
ETHERNET SHIELD COMPATIBLE WITH ARDUINOStock Number:
1813-DF22760380
ETHERNET SHIELD COMPATIBLE WITH ARDUINOStock Number:
1813-DF2
Ethernet shield instantly enables internet connectivity for arduino projects. An on-board wiz5100 ethernet controller handles up to four tcp and udp connections, just stack it onto an arduino to create your own networked devices. Easily check connection status with on board indic...More$19.95 CADAvailable OnlineAvailable in StoresView Details
2760384
SD CARD SHIELD COMPATIBLE WITH ARDUINOStock Number:
1813-FB22760384
SD CARD SHIELD COMPATIBLE WITH ARDUINOStock Number:
1813-FB2
The SD card shield adds storage to your Arduino project. It supports SD, SDHC, or MicroSD TF cards. Use the on-board toggle switch to select the SD card type.And when you want plug a sd card on it,you should select the switch to the right direction. It just uses the SPI ports...MoreREG.$9.95$4.95 CAD SAVE $5Available OnlineAvailable in StoresView Details
MSDS-01
MICROD SD SHIELD COMPATIBLE WITH ARDUINOStock Number:
1813-FB3MSDS-01
MICROD SD SHIELD COMPATIBLE WITH ARDUINOStock Number:
1813-FB3
micro SD Shield Bring mass storage to your Arduino projects with this convenient microSD shield. The SD card interfaces over SPI (SCK on D13, MISO on D12, MOSI on D11, and CS on D8). Since SD cards run at 3v3 we’ve included a level shifter so you can use the 5v logic found ...More$14.95 CADAvailable OnlineAvailable in StoresView Details
2760382
TFT SHIELD 2.8IN COLOR W/MICROSD SLOT COMPATIBLE WITH ARDUINOStock Number:
1813-KA12760382
TFT SHIELD 2.8IN COLOR W/MICROSD SLOT COMPATIBLE WITH ARDUINOStock Number:
1813-KA1
2.8" diagonal color touchscreen TFT 240x320 resolution, 18-bit (262,000) color - our library uses 16 bit color mode ILI9341 (datasheet) controller with built in video RAM buffer STMPE610 touch screen controller High speed SPI display with digital SPI touchscreen driver The d...More$39.95 CADAvailable OnlineAvailable in StoresView Details
ARDTS-156315
TOUCH SCREEN 2.4IN COMPATIBLE WITH ARDUINOStock Number:
1813-KB3ARDTS-156315
TOUCH SCREEN 2.4IN COMPATIBLE WITH ARDUINOStock Number:
1813-KB3
This 2.4 inch tft lcd shield is resistive touch, not capacitive touch. -The 2.4 inch display can be directly plug into u no and 2560. -Wiring with STC12 board: 5V-5V, 3V3-3V3, GND-GND, LCD_D0-P20, LCD_D1-P21, LCD_D2-P22, LCD_D3-P23, LCD_D4-P24, LCD_D5-P25, LCD_D6-P26, LCD_D7-P2...More$39.95 CADAvailable OnlineAvailable in StoresView Details
WPSH412
TOUCH SCREEN 2.8IN COMPATIBLE WITH ARDUINO UNO/MEGAStock Number:
1813-KC2WPSH412
TOUCH SCREEN 2.8IN COMPATIBLE WITH ARDUINO UNO/MEGAStock Number:
1813-KC2
resolution: 240 RGB (H) x 320 (V) display driver: ILI9341 V0.7 colour depth: 262 000 colours system interface: 8-bits, 9-bits, 16-bits, 18-bits interface with 8080-I /8080-II series MCU 6-bits, 16-bits, 18-bits RGB interface with graphic contr...More$32.95 CADAvailable OnlineAvailable in StoresView Details
16X2SHD-01
LCD DISPLAY & KEYPAD SHIELD 16X2 COMPATIBLE WITH ARDUINO BOARDStock Number:
1813-KD116X2SHD-01
LCD DISPLAY & KEYPAD SHIELD 16X2 COMPATIBLE WITH ARDUINO BOARDStock Number:
1813-KD1
The OSEPP 16 x 2 LCD Display and Keypad shield can plug directly onto the Arduino and Arduino compatible boards. The LCD panel displays characters in white with a blue backlit and can display up to two lines of 16 characters. The shield includes 6 momentary push button that ca...More$26.95 CADAvailable OnlineAvailable in StoresView Details
111518
TINKERKIT LCD MODULEStock Number:
1813-KE1111518
TINKERKIT LCD MODULEStock Number:
1813-KE1
The TinkerKit LCD module makes it really easy to write text on the screen in a few minutes. There are two unique ways to write to the screen:plugged to a TinkerKit shield like any other TinkerKit modulestand-alone, directly connected to the USB port of your computerFeaturesThe ...MoreREG.$24.95$12.95 CAD SAVE $12Available OnlineAvailable in StoresView Details
I2CSHD-01
I2C EXPANSION SHIELD LCD DISPLAY KEYPAD SHIELD COMPATIBLE ARDUINOStock Number:
1813-KF1I2CSHD-01
I2C EXPANSION SHIELD LCD DISPLAY KEYPAD SHIELD COMPATIBLE ARDUINOStock Number:
1813-KF1
Arduino I2C Expansion Shield The OSEPP I2C Expansion Shield is an Arduino-Compatible daughter (extension) card. It provides easy interconnection with other I2C devices, such as the OSEPP Sensor Modules family. As well, it integrates an I2C switch that provides 4 additional isolat...More$38.95 CADAvailable OnlineAvailable in StoresView Details
SCSHD-01G
MOTOR DRIVER SHIELD L293D 2 SERVO OR STEPPER OR 4 DC MOTORStock Number:
1813-MD1SCSHD-01G
MOTOR DRIVER SHIELD L293D 2 SERVO OR STEPPER OR 4 DC MOTORStock Number:
1813-MD1
The OSEPP Motor and Servo Shield can plug directly onto the Arduino and Arduino compatible boards. Support for:2 servo motors and 4 bi-directional DC motors with individual 8-bit speed selection OR2 servo motors and 2 stepper motors (uni-polar or bipolar) with single coil, do...More$34.95 CADAvailable OnlineAvailable in StoresView Details
SENSHD-01
SENSOR SHIELDStock Number:
1813-PD1SENSHD-01
SENSOR SHIELDStock Number:
1813-PD1
Sensor Shield Easily connect Servo motors, Sensors, and Bluetooth/RF modules to your Arduino or Arduino Compatible board. This Sensor Shield provides breakout connectors for standard Servo Motors and various 3-pin Sensors. A 5v DC screw terminal enables you to drive power hungr...More$18.95 CADAvailable OnlineAvailable in StoresView Details
2760381
SPEED RELAY SHIELD COMPATIBLE WITH ARDUINOStock Number:
1813-RA12760381
SPEED RELAY SHIELD COMPATIBLE WITH ARDUINOStock Number:
1813-RA1
The Relay Shield provides four high quality relay that can control high current loads to Arduino / Seeeduino boards. It also provides NO (Normally Open) / NC (Normally Closed) interface. It could be a nice solution for controlling devices that could not be directly controlled by ...More$19.95 CADAvailable OnlineAvailable in StoresView Details
4 RELAY SHIELD COMPATIBLE WITH ARDUINOStock Number:
1813-RA1A
4 RELAY SHIELD COMPATIBLE WITH ARDUINOStock Number:
1813-RA1A
The 4 Channel Relay Shield provides four relay channels for switching various circuits. It is designed for use with microcontrollers and offers reliable control for multiple devices. Key Features: Channels: 4 Type: Relay shield Compatible with microcontrollers ...More$19.95 CADAvailable OnlineAvailable in StoresView Details
4489
L9110H H BRIDGE MOTOR DRIVER FOR DC MOTORS 8PIN DIP 2.5-12VStock Number:
1813-ZA14489
L9110H H BRIDGE MOTOR DRIVER FOR DC MOTORS 8PIN DIP 2.5-12VStock Number:
1813-ZA1
Run two solenoids or a single DC motor with up to 800mA per channel using the super-simple L9110H H-bridge driver. This bridge chip is an 8 DIP package so it's easy to fit onto any breadboard or perfboard. Each chip contains one full H-bridge (two half H-bridges). That means you ...More$3.95 CADAvailable OnlineAvailable in StoresView Details
ARDGP-011070
GPS SHIELD WITH ANTENNS NEO 6M W/SD CARD SLOT 3.3/5V IO SERIALStock Number:
1813-DA12ARDGP-011070
GPS SHIELD WITH ANTENNS NEO 6M W/SD CARD SLOT 3.3/5V IO SERIALStock Number:
1813-DA12$39.95 CADAvailable OnlineAvailable in StoresView Details
1048-ADF
GPS LOGGER SHIELD KIT WITH GPS MODULE 10HZ UPDATES 66 CHANNELSStock Number:
1813-DA7A1048-ADF
GPS LOGGER SHIELD KIT WITH GPS MODULE 10HZ UPDATES 66 CHANNELSStock Number:
1813-DA7A
Assembled shield that comes with an Ultimate GPS module. This GPS shield works great with either UNO or Leonardo Arduinos and is designed to log data to an SD card. Or you can leave the SD card out and use the GPS for a geocaching project, or maybe a music player that changes tun...More$74.95 CADAvailable OnlineAvailable in StoresView Details
VMA202
DATA LOGGING SHIELD COMPATIBLE WITH ARDUINOStock Number:
1813-EB1VMA202
DATA LOGGING SHIELD COMPATIBLE WITH ARDUINOStock Number:
1813-EB1
A dedicated and well-designed data logging shield for Arduino. SD card interface works with FAT16 or FAT32 formatted cards. The 3.3 V level shifter circuitry prevents damage to your SD card. Real time clock (RTC) keeps the time going even when the Arduino is unplugged. The batt...More$16.95 CADAvailable OnlineAvailable in StoresView Details- WPSH202
DATA LOGGING SHIELD COMPATIBLEStock Number:
1813-EB1AWPSH202
DATA LOGGING SHIELD COMPATIBLEStock Number:
1813-EB1A$16.95 CADAvailable OnlineAvailable in StoresView Details 
ARDDL-007503
DATA LOGGING SHIELD RTC FUNCTIONStock Number:
1813-EB1AAARDDL-007503
DATA LOGGING SHIELD RTC FUNCTIONStock Number:
1813-EB1AA
RTC Data Logging Shield The RTC Data Logging Shield provides real-time clock functionality for data logging applications. It integrates with microcontrollers to add time-stamping capabilities to data collection projects. Key Features: Type: RTC Shield Data logging ...More$9.95 CADAvailable OnlineAvailable in StoresView Details
TEL0075
RF SHIELD 315MHZ COMPATIBLE WITH ARDUINOStock Number:
1813-GA2TEL0075
RF SHIELD 315MHZ COMPATIBLE WITH ARDUINOStock Number:
1813-GA2
This is an Arduino RF shield that works under 315Mhz. 315M hz is widely applied in areas like vehicle monitoring, remote control, home security system, wireless meter reading, guard monitor system, industrial data acquisition system, wireless tag, identification, non-contact RF ...More$15.95 CADAvailable OnlineAvailable in StoresView Details
ARDNF-053201
NFC SHIELD BASED ON PN532 NXP 13.56M 2CM SPI SUPPORT P2PStock Number:
1813-GA3ARDNF-053201
NFC SHIELD BASED ON PN532 NXP 13.56M 2CM SPI SUPPORT P2PStock Number:
1813-GA3
NFC PN532 Shield NFC(Near Field Communication) PN532 is a set of standards for smartphones and similar devices to establish radio communication with each other by touching them together or bringing them into close proximity , it builds upon RFID systems by allowing two-way com...More$26.95 CADAvailable OnlineAvailable in StoresView Details
ARDBE-001108
BLUETOOTH SHIELD HC-05Stock Number:
1813-HA1ARDBE-001108
BLUETOOTH SHIELD HC-05Stock Number:
1813-HA1
HC-05 Bluetooth Shield The HC-05 Bluetooth Shield enables easy integration of Bluetooth functionality into your projects. It provides a straightforward way to add Bluetooth communication to Micro-controller based systems. Key Features Type: Bluetooth Shield Comm...More$7.95 CADAvailable OnlineAvailable in StoresView Details- P2050
TFT TOUCHSCREEN 3.5IN BREAKOUT W/MICROSD SOKCET 320X480Stock Number:
1813-KA2P2050
TFT TOUCHSCREEN 3.5IN BREAKOUT W/MICROSD SOKCET 320X480Stock Number:
1813-KA2
3.5" TFT 320x480 + Touchscreen Breakout Board w/MicroSD Socket - HX8357D This display has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller. The display can be used in two modes: 8-bit or SPI. For 8-bit mode, you'll need 8 dig...More$49.95 CADAvailable OnlineAvailable in StoresView Details 
772
ADAFRUIT LCD SHIELD KITStock Number:
1813-KB1A772
ADAFRUIT LCD SHIELD KITStock Number:
1813-KB1A$36.95 CADAvailable OnlineAvailable in StoresView Details
802
ADAFRUIT 18IN COLOR TFT SHIELD W/MICROSD SLOT & JOYSTICK SWITCHStock Number:
1813-KB2802
ADAFRUIT 18IN COLOR TFT SHIELD W/MICROSD SLOT & JOYSTICK SWITCHStock Number:
1813-KB2
This lovely little shield is the best way to add a small, colorful and bright display to any project. We took our popular 1.8" TFT breakout board and remixed it into an Arduino shield complete with microSD card slot and a 5-way joystick navigation switch (with a nice plastic knob...More$53.95 CADAvailable OnlineAvailable in StoresView Details
714
RGB LCD SHIELD KIT 16X2 CHARACTER NEGATIVE DISPLAYStock Number:
1813-KC1714
RGB LCD SHIELD KIT 16X2 CHARACTER NEGATIVE DISPLAYStock Number:
1813-KC1
Comes with a 16x2 RGB backlight LCD, negative display Plug and play with any Arduino 'classic' - UNO, duemilanove, diecimilla, etc as well as Arduino Mega R3. Uses only the I2C pins - Analog 4 & 5 on classic Arduinos, Digital 20 and 21 on Arduino Mega R3 ...More$47.95 CADAvailable OnlineAvailable in StoresView Details
ARDLC-001602
LCD DISPLAY & KEYPAD SHIELD 16X2Stock Number:
1813-KD1AAARDLC-001602
LCD DISPLAY & KEYPAD SHIELD 16X2Stock Number:
1813-KD1AA
LCD Keypad Shield The LCD Keypad Shield integrates an LCD display with a keypad, providing a combined interface for user input and display. Ideal for projects requiring a compact input/output solution. Key Features: Voltage: 5V Includes LCD and keypad Compact ...More$19.95 CADAvailable OnlineAvailable in StoresView Details
RASPE-162002
LCD DISPLAY & KEYPAD SHIELD 16X2 I2C INTERFACEStock Number:
1813-KD2RASPE-162002
LCD DISPLAY & KEYPAD SHIELD 16X2 I2C INTERFACEStock Number:
1813-KD2
16x2 RGB Character LCD Keypad Hat for Raspberry Pi The 16x2 RGB Character LCD Keypad Hat adds a 16x2 RGB character display with a keypad to Raspberry Pi, enabling interactive display options. Key Features Display Size: 16x2 characters Color: RGB backlight Volt...More$14.95 CADAvailable OnlineAvailable in StoresView Details
LCDHD-508048
LCD TOUCH SCREEN 5IN 800X480 RESISTIVE LCD LOW POWERStock Number:
1813-KE2LCDHD-508048
LCD TOUCH SCREEN 5IN 800X480 RESISTIVE LCD LOW POWERStock Number:
1813-KE2
5inch Resistive Touch Screen LCD (B), 800×480, HDMI, Low Power Consumption The 5" HDMI TFT Touchscreen offers a high-resolution 800x480 display with touchscreen functionality. Key Features Display Size: 5" Resolution: 800x480 pixels Voltage: 5V Current: ...More$48.95 CADAvailable OnlineAvailable in StoresView Details
ARDMD-070028
DUAL H-BRIDE MOTOR SHIELD PWMStock Number:
1813-MA1ARDMD-070028
DUAL H-BRIDE MOTOR SHIELD PWMStock Number:
1813-MA1
Dual Channel H-Bridge Motor Shield The Dual Channel H-Bridge Motor Shield is composed of 2 discrete MOSFET H-bridge, designed to drive two DC motor with max current 8A. It is made up of 8 N-channel MOSFET IRF3205S and 4 pcs of half bridge motor controller IR2104, to build 2 H-...More$19.95 CADAvailable OnlineAvailable in StoresView Details
1411
ADAFRUIT 16-CHANNEL 12-BIT PWM/S SERVO SHIELD I2C INTERFACEStock Number:
1813-MA21411
ADAFRUIT 16-CHANNEL 12-BIT PWM/S SERVO SHIELD I2C INTERFACEStock Number:
1813-MA2
Adafruit 16-Channel 12-bit PWM/Servo Shield - I2C interface You want to make a cool Arduino robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise PWM output. Then you realize that the Ardui...More$19.95 CADAvailable OnlineAvailable in StoresView Details
RUB-01
LINUX PC SHIELD RUBIX COMPATIBLE WITH ARDUINOStock Number:
1813-SB1RUB-01
LINUX PC SHIELD RUBIX COMPATIBLE WITH ARDUINOStock Number:
1813-SB1
The Rubix is an Arduino compatible shield that enables you to turn your Arduino UNO into a Linux platform. Getting Started Wiring Diagram...More$59.95 CADAvailable OnlineAvailable in StoresView Details
HEAD OFFICE
SAYAL Electronics
3791 Victoria Park Avenue
Toronto, Ontario, Canada
M1W 3K6
placeholder
placeholder
Copyright © 2025 SAYAL Electronics and Hobbies