Product Details you're searching for are unavailable at this time.
Check out the following Popular Products below.
POPULAR PRODUCTS25 Product(s) found
C6871
IR ACTIVATOR ROBOTStock Number:
1165-TA1C6871
IR ACTIVATOR ROBOTStock Number:
1165-TA1
Our special IR Activator Kit vibrates and scoots while flashing 1 red LED and 6 IR LEDs. If placed near an Alien Warbot Robot, the IR Activator Robot will cause the Warbot to immediately come to life and either move towards it to attack or away from it to run! This kit is not ...MoreREG.$19.95$15.95 CAD SAVE $4Available OnlineAvailable in StoresView Details
EDU-4003
WAKE ME ROBOTStock Number:
1195-BL4EDU-4003
WAKE ME ROBOTStock Number:
1195-BL4
The Elenco Wake Me Robot Kit uses a light sensor, making it sensitive to light. Build your own working Wake up Robot. Control your robot using a light flashlight. The Elenco Wake Me Robot requires simple hand tools for assembly (screw driver, pliers). Quick to assemble and requir...MoreREG.$19.95$9.95 CAD SAVE $10Available OnlineAvailable in StoresView Details
ABX00087
ARDUINO UNO R4 WIFI BOARD RA4M1 CONTROLLER 14 DIGITAL 6 ANALOGStock Number:
1811-AA3ABX00087
ARDUINO UNO R4 WIFI BOARD RA4M1 CONTROLLER 14 DIGITAL 6 ANALOGStock Number:
1811-AA3
Arduino® UNO R4 WiFi The Arduino UNO R4 WiFi merges the RA4M1 microprocessor from Renesas with the ESP32-S3 from Espressif, creating an all-in-one tool for makers with enhanced processing power and a diverse array of new peripherals. With its built-in Wi-Fi® and Bluetooth®...More$62.95 CADAvailable OnlineAvailable in StoresView Details
A000057
ARDUINO LEONARDO WITH HEADERSStock Number:
1811-HA1AA000057
ARDUINO LEONARDO WITH HEADERSStock Number:
1811-HA1A
The Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset...More$44.95 CADAvailable OnlineAvailable in StoresView Details
PROTO-01
PROTO SHIELD COMPATIBLE WITH ARDUINOStock Number:
1813-AB1PROTO-01
PROTO SHIELD COMPATIBLE WITH ARDUINOStock Number:
1813-AB1
Proto Shield This Prototyping shield brings a small prototyping area to your Arduino for you to build your projects on. It includes two general purpose LEDs with resistors ready to use, just connect the anode pin to your Arduino. Also includes a user push-button with a pull-up...More$16.95 CADAvailable OnlineAvailable in StoresView Details
714
RGB LCD SHIELD KIT 16X2 CHARACTER NEGATIVE DISPLAYStock Number:
1813-KC1714
RGB LCD SHIELD KIT 16X2 CHARACTER NEGATIVE DISPLAYStock Number:
1813-KC1
Comes with a 16x2 RGB backlight LCD, negative display Plug and play with any Arduino 'classic' - UNO, duemilanove, diecimilla, etc as well as Arduino Mega R3. Uses only the I2C pins - Analog 4 & 5 on classic Arduinos, Digital 20 and 21 on Arduino Mega R3 ...MoreREG.$47.95$24.95 CAD SAVE $23Available OnlineAvailable in StoresView Details
I2CSHD-01
I2C EXPANSION SHIELD LCD DISPLAY KEYPAD SHIELD COMPATIBLE ARDUINOStock Number:
1813-KF1I2CSHD-01
I2C EXPANSION SHIELD LCD DISPLAY KEYPAD SHIELD COMPATIBLE ARDUINOStock Number:
1813-KF1
Arduino I2C Expansion Shield The OSEPP I2C Expansion Shield is an Arduino-Compatible daughter (extension) card. It provides easy interconnection with other I2C devices, such as the OSEPP Sensor Modules family. As well, it integrates an I2C switch that provides 4 additional isolat...More$38.95 CADAvailable OnlineAvailable in StoresView Details
OPTDD-002476
DISTANCE SENSOR ANALOG 10-150CM 3V GP2Y0A60SZLFStock Number:
1814-DA13OPTDD-002476
DISTANCE SENSOR ANALOG 10-150CM 3V GP2Y0A60SZLFStock Number:
1814-DA13
The GP2Y0A60SZ distance sensor offers a wide detection range of 4″ to 60″ (10 cm to 150 cm) and a high update rate of 60 Hz. The distance is indicated by an analog voltage, so only a single analog input is required to interface with the module. The sensor ships installed on o...More$9.95 CADAvailable OnlineAvailable in StoresView Details
938
OLED GRAPHIC DISPLAY 128X64 1.3 IN MONOCHROME STEMMA QT/QWIICStock Number:
1814-FA2938
OLED GRAPHIC DISPLAY 128X64 1.3 IN MONOCHROME STEMMA QT/QWIICStock Number:
1814-FA2
Monochrome 1.3" 128x64 OLED graphic display - STEMMA QT / Qwiic These displays are small, only about 1.3" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one is turned on or off by the c...More$39.95 CADAvailable OnlineAvailable in StoresView Details
PICO-LCD-1.14
LCD DISPLAY 1.14INCH 2.6V-5.5V 40MA FOR RASPBERRY PI PICOStock Number:
1814-FB5PICO-LCD-1.14
LCD DISPLAY 1.14INCH 2.6V-5.5V 40MA FOR RASPBERRY PI PICOStock Number:
1814-FB5
240×135 resolution, IPS screen, 65K RGB colors, clear and colorful displaying effect SPI interface, requires minimal IO pins 1x joystick and 2x user buttons for easy interacting Comes with development resources and manual (Raspberry Pi Pico C/C++ and Micro...MoreREG.$24.95$19.95 CAD SAVE $5Available OnlineAvailable in StoresView Details
VMA332
RELAY MODULE 1 CHANNEL SOLID STATEStock Number:
1814-JB3VMA332
RELAY MODULE 1 CHANNEL SOLID STATEStock Number:
1814-JB3
power supply: 5 VDC power current: max. 10 mA input voltage: relay ON: 0 to 2.5 VDC relay OFF: 3.3 to 5 VDC max. load: 240 VAC 2 A 50/60 Hz dimensions: 2.5 x 2.5 x 3.6 cm weight: 6 g protection: 2A Pico fuse on board...More$12.95 CADAvailable OnlineAvailable in StoresView Details
74110
RELAY MODULE 8 CHANNEL IP 5VDCStock Number:
1814-JC2B74110
RELAY MODULE 8 CHANNEL IP 5VDCStock Number:
1814-JC2B$19.95 CADAvailable OnlineAvailable in StoresView Details
WPSE309
MICROPHONE SOUND SENSOR MODULE COMPATIBLE WITH ARDUINOStock Number:
1814-KA1AWPSE309
MICROPHONE SOUND SENSOR MODULE COMPATIBLE WITH ARDUINOStock Number:
1814-KA1A$11.95 CADAvailable OnlineAvailable in StoresView Details
MTRBK-000004
HC-SR04 SENSOR BRACKET FOR ROBOTICS & AUTOMATIONStock Number:
1814-KD2MTRBK-000004
HC-SR04 SENSOR BRACKET FOR ROBOTICS & AUTOMATIONStock Number:
1814-KD2$2.95 CADAvailable OnlineAvailable in StoresView Details
PROMR-002133
DRV8825 STEPPER MOTOR DRIVER HIGH CURRENT 2.2A 8-45VStock Number:
1814-LA3AAPROMR-002133
DRV8825 STEPPER MOTOR DRIVER HIGH CURRENT 2.2A 8-45VStock Number:
1814-LA3AA$5.95 CADAvailable OnlineAvailable in StoresView Details
DRV8825 STEPPER MOTOR DRIVERStock Number:
1814-LA3AB
DRV8825 STEPPER MOTOR DRIVERStock Number:
1814-LA3AB$5.95 CADAvailable OnlineAvailable in StoresView Details
PROMR-009110
L9110 DUAL H-BRIDGE MOTOR DRIVER 2.5V-12V 800MAStock Number:
1814-LA6PROMR-009110
L9110 DUAL H-BRIDGE MOTOR DRIVER 2.5V-12V 800MAStock Number:
1814-LA6
The L9110 is a dual motor driver capable of handling up to 0.8A per motor. It is designed for small motor control applications, providing efficient and reliable performance for various electronics and robotics projects. Dual Motor Driver Current Rating: 0.8A per Motor...More$7.95 CADAvailable OnlineAvailable in StoresView Details
WPM411
IRF520 MOSFET DRIVER MODULE COMPATIBLE WITH ARDUINOStock Number:
1814-LB4WPM411
IRF520 MOSFET DRIVER MODULE COMPATIBLE WITH ARDUINOStock Number:
1814-LB4
ARDUINO COMPATIBLE MOS DRIVING MODULE This little module is a breakout board for the IRF520 MOSFET transistor. The module is designed to switch heavy DC loads from a single digital pin of your microcontroller. Its main purpose is to provide a low cost way to drive a DC motor for ...More$8.95 CADAvailable OnlineAvailable in StoresView Details
WPI401
STEPPER MOTOR DRIVER 5V ULN2003 WITH STEPPER MOTOR 5VDCStock Number:
1814-LC1WPI401
STEPPER MOTOR DRIVER 5V ULN2003 WITH STEPPER MOTOR 5VDCStock Number:
1814-LC1
A small and versatile motor and driver set. This 5 VOLTS DC stepper motor controlled by the ULN2003 driver can be used with any Arduino® or compatible boards via jumper leads. Four-phase LED indicates the status of the stepper motor. Features ...More$10.95 CADAvailable OnlineAvailable in StoresView Details
TOUCH-01
TOUCH SENSOR MODULE 3-5VStock Number:
1814-MB1TOUCH-01
TOUCH SENSOR MODULE 3-5VStock Number:
1814-MB1
Easy breakout to connect to Arduino. Detects body capacitive touch, outputting analog voltage. 3 pin outs: G (GRD) V (VCC) S ( Signal) 3-5 V operating range 5 mA minimum current requirement. Capacitive touch detection ...MoreREG.$9.95$7.95 CAD SAVE $2Available OnlineAvailable in StoresView Details
VMA305
TOUCH SENSOR MODULE 3-5VStock Number:
1814-MB1AVMA305
TOUCH SENSOR MODULE 3-5VStock Number:
1814-MB1A
A capacitive sensor is a touch sensor that requires little or no force to activate. Detects body capacitive touch, outputting analogue voltage. connection: 3 pins, GND - VCC - Signal voltage: 3 to 5 VDC dimensions: 30 x 16 x 6 mm weight: 5 g ...MoreREG.$9.95$7.95 CAD SAVE $2Available OnlineAvailable in StoresView Details
SPKPS-002063
PIEZO ELECTRIC ELEMENT 20MM SOUNDER 6.3KHZStock Number:
1814-MB4SPKPS-002063
PIEZO ELECTRIC ELEMENT 20MM SOUNDER 6.3KHZStock Number:
1814-MB4$2.95 CADAvailable OnlineAvailable in StoresView Details
PROPW-002009
DC-DC VOLTAGE STEP UP/DN MODULE S18V20F9 I/P:3-30V O/P:9V 2AStock Number:
1814-NA11PROPW-002009
DC-DC VOLTAGE STEP UP/DN MODULE S18V20F9 I/P:3-30V O/P:9V 2AStock Number:
1814-NA11
This powerful step-up/step-down regulator efficiently produces a fixed 9V output from input voltages between 3V and 30V while allowing a typical output current of up to 2A when the input voltage is close to the output voltage and offering typical efficiencies of 80% to 90%. Its a...MoreREG.$19.95$17.95 CAD SAVE $2Available OnlineAvailable in StoresView Details
LM2596 POWER MODULE
DC-DC VOLTAGE STEPDOWN MODULE 3A O/P 1.5-35V I/P 3.2-40V VOLTMETRStock Number:
1814-NA8ALM2596 POWER MODULE
DC-DC VOLTAGE STEPDOWN MODULE 3A O/P 1.5-35V I/P 3.2-40V VOLTMETRStock Number:
1814-NA8A$8.95 CADAvailable OnlineAvailable in StoresView Details
VOLT-01
VOLTAGE SENSOR MODULE OPERATING VOLTAGE 3.3-5VStock Number:
1814-NB1VOLT-01
VOLTAGE SENSOR MODULE OPERATING VOLTAGE 3.3-5VStock Number:
1814-NB1
The voltage sensor can detect the supply voltage from 0.0245V to 25V. 100% Arduino Compatible Operating voltage output : 3.3V – 5V MAX Input voltage range 0.0245V ~ 25V MAX Analog input ...More$11.95 CADAvailable OnlineAvailable in StoresView Details
HEAD OFFICE
SAYAL Electronics
3791 Victoria Park Avenue
Toronto, Ontario, Canada
M1W 3K6
placeholder
placeholder
Copyright © 2026 SAYAL Electronics and Hobbies